Power steering 2360 long tractor
Jdmc57
Join Date: Jul 2017 Posts: 9 Midland,NC |
2017-07-12 196841
I am fighting with my steering. Replaced cylinder. Loud noise when I attempt to turn. I can force the issue. Do I have air in the system. I was thinking bearings but both sides started making noise at the same time. Plenty of grease. Any suggestions.
Reply to | Quote Reply | Add Photo
Power steering 2360 long tractor
fullcredit
Join Date: Feb 2017 Posts: 10 Arkansas |
2017-07-12 196842
Not sure about your 2360, but my 460 has a reservoir under the hood for the power steering. Make sure it is full, and bleed your system if you haven't already. Hope this helps ....
Reply to | Quote Reply | Add Photo
Power steering 2360 long tractor
Jdmc57
Join Date: Jul 2017 Posts: 9 Midland,NC |
2017-07-12 196845
Quote:
|
Reply to | Quote Reply | Add Photo
Power steering 2360 long tractor
jblackwell
Join Date: Jun 2016 Posts: 6 NC |
2017-07-12 196848
I'm sure you've tried this, but if it were me I'd jack up the front end and disconnect the cylinder from the arm and see if if it goes in and out smoothly. Then try and turn the wheels by hand. It they won't turn fairly easily with no weight on them there is a dry spot on a spindle somewhere. ....
Reply to | Quote Reply | Add Photo
Power steering 2360 long tractor
Jdmc57
Join Date: Jul 2017 Posts: 9 Midland,NC |
2017-07-12 196849
Yea I have regressed with high temp nano grease heated spinal hoping to bring grease to dry spot/bearings. I am assuming it has them. Manual does not show any. I am desperately trying to keep from tearing the front end down. That worked for about 10 hrs of operation. Got back on her. Same noise. It will all be just like new before this is over. I replaced the cylinder. Might as well do the pump and reservoir. I will fix it and shoot you a note telling you what it was. Might help you down. The Rd. Thanks. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This