POST ANY PROBLEMS/FIXES FOR JD 4010 SERIES TRACTORS: John Deere Review  -- John Deere Tractors Discussion Forum and Review POST ANY PROBLEMS/FIXES FOR JD 4010 SERIES TRACTORS: John Deere Review -- John Deere Tractors Discussion Forum

  parts   |   manuals   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index
New As Posted | Active Subjects



www.emerichsales.com - New & Used Equipment
          View Tractors For Sale!


www.partsbynet.com - Lawn and Garden Equipment Parts


Bernardsville Landscape Lighting
Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > John Deere Review Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 01-15-2003, 10:45 Post: 47548
jdfan



Join Date: Jul 2003
Location: PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 25

5
Filter by User
 POST ANY PROBLEMS/FIXES FOR JD 4010 SERIES TRACTORS

Please post any Problems / fixes here on the 4000 ten series tractors

Example-4310 purchase in Dec 2002,for no apparent reason the unit while moving and then stopped will not move forward/back without the key being turned off and started over.

Dealer fix-replace the ehydro contol module.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 01-15-2003, 10:48 Post: 47549
jdfan



Join Date: Jul 2003
Location: PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 25

5
Filter by User
 POST ANY PROBLEMS/FIXES FOR JD 4010 SERIES TRACTORS

4310 with 48 backhoe, would not lift into position to allow the l pins to be inserted, you needed to use the stabilizers to lift it the extra 1/4 in to allow the pins to be inserted.

Dealer fix-adjust the two silver brackets on the 48 backhoe to grap the 3 point hitch closer together thereby getting the extra 1/4 lift needed.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 01-15-2003, 10:51 Post: 47550
jdfan



Join Date: Jul 2003
Location: PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 25

5
Filter by User
 POST ANY PROBLEMS/FIXES FOR JD 4010 SERIES TRACTORS

4310 tilt wheel stuck and would not move

dearler fix-new pip on JD 4010 series units, some early models shipped with plastic device in tilt wheel which breaks. JD modified the design with a metal device which corrected the problem. There is a kit to fix all units shipped with the old style.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 01-15-2003, 10:53 Post: 47551
jdfan



Join Date: Jul 2003
Location: PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 25

5
Filter by User
 POST ANY PROBLEMS/FIXES FOR JD 4010 SERIES TRACTORS

4310 power beyond kit for 48 backhoe had hoses popping off when unit was used with backhoe

Dealer fix-turned out to be an incorrectly insidalled power beyond kit and improper hose routing making it difficult to even get the hoses on and off due to the space issue under the seat. Dealer reworked the hose routing which corrected the problem.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 01-15-2003, 11:19 Post: 47555
Billy

TP Contributor

View my Photos

View my Photos  Pics
Join Date: Oct 1999
Location: Southeast Oklahoma
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 975
 POST ANY PROBLEMS/FIXES FOR JD 4010 SERIES TRACTORS

JD 4610 fuel guage needle would bounce around.
Dealer fix. replace sending unit.

Small hydraulic leak.
Dealer fix. Don't know but he fixed it.

I couldn't get telescoping draft links to fit on tractor.
Dealer fix. Reordered the right ones Smile

Billy






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 01-15-2003, 15:22 Post: 47562
Not Impressed
2003-01-15 00:00:00
Post: 47562
 POST ANY PROBLEMS/FIXES FOR JD 4010 SERIES TRACTORS

JD Fan: What's your point? Any reason for the multiple posts to the thread that you started, or could that have been confined to one single post? Its too bad that you are unhappy with your tractor, but I'm you aren't trying to gang up on JD. Sounds like you should be thinking about changing your user name. I'm surprised that Billy fell for it.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 01-15-2003, 17:21 Post: 47568
Peters

TP Contributor

View my Photos

View my Photos  Pics
Join Date: Feb 2002
Location: Northern AL
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 3034
 POST ANY PROBLEMS/FIXES FOR JD 4010 SERIES TRACTORS

Mr not impressed (Mr. JD dealer), if you want to state an opinion on a subject then register and give your name. I believe the work here is to provide a list of problems and fixes. I am not sure the JDfan is irrate at his dealer he is just listing the individual problems the corrections. If you owned a 3x10 then the heads up list of problems maybe useful.
Of course if you are Mr. Dealer it might not be advantagous for the buyers to have a list of waranty repairs before the tractor leaves the lot.
Incidentally, I looked at a similar list on the GM Duramax the other day on a GM diesel site.
Peters






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 01-16-2003, 07:50 Post: 47602
cef2lion



Join Date: Jul 2003
Location: PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 41
 POST ANY PROBLEMS/FIXES FOR JD 4010 SERIES TRACTORS

Over-all very happy.

My 4310 has a bouncing fuel gauge while moving but I thought that was normal? Normal or not?

My gauge cover clouds at times. It clears later. I have seen a post that someone had it replaced. Same part or an upgraded one?

I got the tilt wheel fix as well. Still seems hard to move at times.

Cruise shut off at times. They adjusted a brake switch that seemed sensitive.

Talked to Dealer about the height adjustment for the MMM and the feeler gauge type stop on the knob. JD said they were working on something better. That was last summer but have not heard back as yet.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 01-16-2003, 07:55 Post: 47603
jdfan



Join Date: Jul 2003
Location: PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 25

5
Filter by User
 POST ANY PROBLEMS/FIXES FOR JD 4010 SERIES TRACTORS

Guys,

This is my second 4310 in the last year, I would not have bought a second unit if I did not feel deere was the best. I feel any new product may have some bugs and a link that lists any issues and the resolution may save us all a lot of needless headaches. For example the ehydro issue, where the tractor is stopped and then will not move forward or backward without shutting the unit down and restarting. All the posts seem to indicate the fix is the ehydro control module. Many owners and dealers could save themself some time by learning from our experience.

I did consider the Kubota but feel the electronics on the deere are functional and you get more work out of your machine with a smaller hp unit.

please continue to prost problems and resolutions it will help all of us.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

 01-17-2003, 07:06 Post: 47656
kadorken



Join Date: Jul 2003
Location: Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 67
 POST ANY PROBLEMS/FIXES FOR JD 4010 SERIES TRACTORS

Only problem so far on 4310 was on delivery where the flashing lights worked intermittently. Fix was to replace
the flashing unit (located under the dash console on the left side).

We are now into -14 C weather (cold for us) so we'll see how it starts; so far it has had no problem starting in cool weather (-8 C to 0 C)






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo




Bookmarks: Digg It | Del.icio.us | Stumble This

Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > John Deere Review Forum

Thread 47548 Filter by Poster:
Billy 1 | cef2lion 1 | jdfan 5 | kadorken 1 | Not Impressed 1 | Peters 1 |




Most Viewed

+ John Deere 2210 Backhoe Review
+ John Deere vs Kubota Compact Tractors
+ John Deere 790 fuel shut-off solenoid failing???
+ John Deere low viscosity HY GARD
+ John Deere JD 4100 Wiring diagram
+ JD 790 or Kubota L3000DT
+ Should I buy a John Deere 4105???
+ John Deere 4300 turns over but won't start
+ John Deere 455 garden tractor
+ Oil Change for Diesel Tractor

Most Discussion

+ John Deere 4300 scuffing......
+ Possible Solution To The 4000
+ Dealer out to lunch
+ Just got my new JD 4410 - Prob
+ Hello Green, Goodbye Orange
+ Receiver hitch for iMatch
+ 4300 wheel bolt problems
+ 4000 Ten Series 50 hour break
+ Don't buy JD compact tractors.
+ Oil Change for Diesel Tractor

Newest Topics

+ Oil overflow from tube and Smoke
+ John Deere 4100 gear 3 point not workin
+ 2000 John Deer Gator 4 X2
+ Mini Excavator SY20C - Small Body with Big Power
+ John Deer 1070 starting problem
+ John Deere 990
+ Tractors R Us
+ john deere 4100 with 410 loader hydraulic problem
+ John Deere 2032R Buying advice
+ John Deere 2010 loss of hydraulics













Turbochargers for Tractors and Industrial Machines
Cab Glass for Tractors and Industrial Machines

Alternators for Tractors and Industrial Machines
Radiators for Tractors and Industrial Machines

Driveline Components for Tractors and Industrial Machines
Starter Motors for Tractors and Industrial Machines