Tractorpoint Login

print < Tractorpoint Login

Search for = Victor

Topic

[QUOTE=oldchevy1;197169] I have a JD 650 which I believe is a rebranded Yanmar. I have had air get into my hydraulic lines because I have a whole somewhere in one of the lines. Anyway, sometimes when I park my tractor for a while and then start it up, the hydraulic activited devices will not work. I end up having to bleed the air out of the lines by loosening the big nut on top the hydraulic unit that sits just under the seat. With the tractor running, I loosen that nut with a breaker bar and right size metric socket. You can hear the air escaping then suddenly with a sputter it will spit out a mixture of air and hydraulic fluid. I quickly tighten the nut after the fluid starts flowing out. I have learned to pack the area surrounding the nut with mechanic rags to catch the spray. I also put a catch basin under the tractor directly under the seat. It will make a huge mess, but it will allow me to operate the hydraulics. When I mean spray, it sprays everywhere. Use old clothes and eye protection. I have started replacing hydraulic lines trying to fix the problem with air getting into my system. [/QUOTE]
Thanks that might be it because I did loosen that fitting when I replaced a seal in the front of the transmission. I will try that and see if that will fix it. Thanks.

Hydraulics Won t Work
Yanmar Tractors
Replies 6 Post by victory51

Hi .can someone tell me what is the highest speed of the hinomoto e2004 can go? Mind was only 6 miles an hour. I felt something wrong but it was a use one and ever own it. Thanks

Hinomoto e2004
Photos
Replies 1 Post by Victor

ok, here's what i do: i wrap a heavy shop rag around the end of the hose fitting and push the hose against a solid object like the loader frame or such. most of the time a heavy squirt of hyd. oil will come out and then the pressure is released and you can connect the hose. SOMETIMES i have to wrap the end and use a channelock pliers and grip the end against the body of the fitting and squeeze to release the pressure, but that is only if it is real hot and the hose fitting has been exposed to the sun and the fluid has expanded. try the first method first.

Quick Connect Problem
Operating and Attachments
Replies 10 Post by victor colby

"the sweetness of cheap prices is forgotton sooner than the bitterness of poor quality". been there,done that on howse implements. i will never go that way again. i had a bush hog gearbox come loose on the very first mowing job with it. some idiot apparently did not take the time to properly tighten the mounting bolts.

Howse impliments are junk
Operating and Attachments
Replies 16 Post by victor colby

i hear ya, guys. i have the same problem with "pushing" up against the lever, especially when i am bushhogging and i turn to look back. sometime almost makes the bucket dig into the ground. lockout is a great idea and i am gonna start using it.

Deere Engineers Anorexic
Tractor Projects
Replies 5 Post by victor colby

hey guys, i have a jd870 w/FEL and i move 750 lb and 1,000 lb round bales on the loader with homemade 4x4 wood forks that i bolt on. when loading i stab a roll with my 3 pt hay king spear and pick up a roll with the front forks. works great. i would not try to lift the rolls with the FEL and no counterweight on the 3 pt. go slow when moving and keep the load low to the ground and DO NOT turn fast.

Bale Spear on Loader
Loaders Back Hoes
Replies 9 Post by victor colby

I require the following:1. Yanmar handtractor, model 85RDI, engine power 8.5pk, qty: 273 units<br>2. Mitsubishi handtractor, similar build type to the above, engine type 8.5 pk, qty: 77 unitsPse response with cost and delivery<br>

Handtractor requirements
Yanmar Tractors
Replies 1 Post by Victor Leong

I agree with the previous post about the sickle weight. they will work fine on your machine. most sickles only weigh about 550-650 lbs.I use a 7 ft. sickle behind my JD 870 to mow my hay. no problems with it. just don't get in a hurry and start going to fast. the sickle will start to skip over the grass. be sure to keep the knife sharp for the best results and try to cover or store the implement inside when not in use.

Sickle Bar Mower
Mowers Field and Finish
Replies 4 Post by victor

Thanks for the info. Still sounds like plenty. Many in my area have been used in Turkey barys.

John Deere 755
John Deere Tractors
Replies 3 Post by Victor Shelton

"> For Sale D-17 w very nice hydralic front loader See Pics here
Other Tractor Brands
Replies 3 Post by Victor

The DT is for dual traction meaning four wheel drive.

Kubota series B L M how to classify each
Kubota Tractors
Replies 7 Post by VictorR

Wanted: 2 or 3 spool (2 or 3 handles) hydraulic valve. To be mounted on Kubota L245DT to operate a Gannon box scraper. The valve should have 1/2 NPT ports.<br>Used is fine.<br>Thanks. Victor

Valve Hydraulic
Other Tractor Brands
Replies 2 Post by VictorR