Tractor towing
James Fabre
Join Date: Posts: 1 |
2000-05-14 16268
Does anyone have experience using a auto-type tow bar for towing theirtractor at slow, dirt road speeds? I need a solution for getting my tractor down 8 miles of dirt mountain roads and don't want to try my trailer on those narrow roads. My concern is that the front end ofthe tractor is not going to track like a towed auto would when I maketurns. Thanks
Reply to | Quote Reply | Add Photo
Tractor towing
RCH
Join Date: Posts: 1 |
2000-05-14 16272
I'd think a tow 'dolly' that carries the front end would be the answer. ....
Reply to | Quote Reply | Add Photo
Tractor towing
David Paul
Join Date: Posts: 1 |
2000-05-14 16273
Do NOT tow a tractor for 8 miles. You don't say what make or model this is, but serious damage can result from towing a tractor these kinds of distances due to lack of lubrication, overspeed etc. If you are that concerned about towing a trailer, I can't see how towing a tractor would be much better. If a trailer is a problem, just drive the tractor the eight miles down the road, it will be much safer for you and the tractor ....
Reply to | Quote Reply | Add Photo
Tractor towing
James Fabre
Join Date: Posts: 1 |
2000-05-15 16286
It is a Ford 1000 and my owners manual said that it is ok to
tow it at speeds under 20mph. Have you heard bad things regarding
the towing of all tractors or just some? ....
Reply to | Quote Reply | Add Photo
Tractor towing
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2000-05-15 16289
The problem with towing ANYTHING is a lack of lubrication. In the case of a tractor most of the lubrication is provided by the transmission gears 'slinging' oil around to everything else. If the engine is not running, the transmission gears are not turning, so there is no lube being circulated. Overheating and bearing failure is almost a guaranteed thing under those circumstances. As already stated, driving the tractor is probably the best solution, almost any tractor will do 16 mph. without a problem, a drive of 1/2 an hour at that speed, probably less than the hook-up, un-hook time required to tow it. Certainly less than the rebuild time should a bearing fail... Best of luck. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This