Go BottomJumpstart tc26da
 | 55dutch
Join Date: Jan 2016 Posts: 2 nj 
|
2016-01-24 194367
looking for a little help, for last month or so have been jumpstarting my tc26da too stubborn to by new battery. Anyway last attempt must have cooked something glo plugs functions but when ignition switched on just dead doesn't try to crank over. Fuses all good Replaced battery, no go thinking maybe I fried starter???
Reply to |
Quote Reply |
Add PhotoJumpstart tc26da
| gotowin
Join Date: Dec 2014 Posts: 26 S. IN.
|
2016-01-24 194368
Make sure all the safety Sws are in the proper position for starting. ....
Reply to |
Quote Reply |
Add PhotoJumpstart tc26da
| Imfedup
Join Date: Dec 2015 Posts: 60 Central Kentucky
|
2016-01-25 194369
If you suspect the starter, it's not hard to test. Remove the plastic cover that hides the cable connections. Locate and remove the start signal wire from the male spade terminal on the starter solenoid. Using a jumper wire of some sort, connect the spade to battery positive for a split second and see what the starter does. If it attempts to engage and crank the engine, it's probably not your current problem. ....
Reply to |
Quote Reply |
Add PhotoJumpstart tc26da
 | kthompson
Join Date: Oct 2005 Posts: 5275 South Carolina 
 Pics
|
2016-01-26 194372
Do not skip the simple things like, poor battery cable connection. Also your jumper cables could be failing. It will take a lot less amps to power those glow plugs than the starter. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This