Ventrac 3000 Center Bearings
dnrsslr
Join Date: Sep 2009 Posts: 6 Ohio |
2009-09-05 165469
This past spring I bought a used Ventrac 3000. It has somewhere between 450 and 500 hours. I think maybe the bearings on the center shaft are noisy. I have been told they don't fly apart, but they get real noisy. How easy are these to replace? Has anyone done this themselves?
Reply to | Quote Reply | Add Photo
Ventrac 3000 Center Bearings
dnrsslr
Join Date: Sep 2009 Posts: 6 Ohio |
2009-11-30 167099
Update: I have replaced the center shaft pillow block bearings. They're expensive; $50 each but not real difficult to change if you are mechanical and/or have someone who knows what they are doing to give you a little guidance. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This