Go BottomCan a 1510 pull it
 | Brian Heskitt
Join Date: Posts: 1 
|
2000-06-06 16945
I am looking at a ford 1510, 4WD, turf tires. Will this unit handle a 6' mower/bush hog, a 2 bottom plow, and a small disk? I posted a similar message yesterday, but I accidentally posted under the topic "john deere price", so I thought the right people may not have seen it. Sorry for the redundancy.thanks,brian
Reply to |
Quote Reply |
Add PhotoCan a 1510 pull it
| dave piper
Join Date: Posts: 1
|
2000-06-06 16951
Brian. I think your only problem will be with the 6' mower. Brochure for the 1510 says max. of 5'. Regards . Dave in
Vt. ....
Reply to |
Quote Reply |
Add PhotoCan a 1510 pull it
| TomG
Join Date: Feb 2002 Posts: 5406 Upper Ottawa Valley 
|
2000-06-07 16979
I'd agree with Dave. If you already had a 6' cutter, and the weight was OK for the 3ph, it probably would work for light mowing (using a grade of shear pin appropriate for the 1510's PTO). However, I sure wouldn't go out and buy a 6' cutter for a 20 PTO HP machine. It just means that one type of work can be done fast, but heavier work can't be done at all.
The 3ph capacity for my 1710 is over 1800 lbs. I think the 1510 has a lighter 3ph, but the weight of most implements shouldn't be a problem. Good question for a dealer though. ....
Reply to |
Quote Reply |
Add PhotoCan a 1510 pull it
| jim vohland
Join Date: Posts: 1
|
2000-06-07 17011
Dont have a 1510 but do have 20 pto hp tractor (yanmar ym2000). Pull a 6 ft finish mower with no problem whatsoever but pulling a two bottom plow would be real interesting. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This