Go Bottom Go Bottom

John Deere 75 loader problem

View my Photos
S bogusta
Join Date:
Posts: 1
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2002-04-12          37363

I posted a question reguarding my 75 loader not working properly. Sincne then I replaced all the quick connectors ect. as recomended. I now am able to lift and lower the bucket, as well as roll bucket forward. I removed the SCV
valve from the machine, a John Deere 850. The "roll lever"
does not travel the way it should. The lift lever moves freely in and out. The roll lever only moves out. I removed the "controll rod" from the houseing, to see what may be holding it back. Everything looks good. The rod will only pull out of ,and not in. John Deere wants 875.00 for a replacement. I priced the componants to rebuild the one rod, and they cost less than 20.00. Do you think I am wasteing my time? What could be causing this. Thanks Steve



Link:   850 Scv valve shcematic

 
Picture Link

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login