Go Bottom Go Bottom

Hydraulic Gremlins

View my Photos
Scrub868
Join Date: Nov 2016
Posts: 2 ohio
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-11-21          195953

Hello all, I am new to your forum and am really hoping somebody on here can help me. I have MITSUBISHI MT2501FD the FEL will not raise unless I raise the 3ph first and after the 3PH has been raised it will raise regardless of direction spool is moved. It will not lower unless I lower the 3ph--even with tractor shut off

it has an external hydraulic pump ran off the front of the tractor comes back to what I think is a diverter or priorty valve where it splits to loader control vavle and to rear 3ph. The return line from the loader control vavle also runs to "something" before returning to rear end sump.
Any ideas would be appreciated


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Hydraulic Gremlins

View my Photos
minimac
Join Date: Jun 2013
Posts: 103
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2016-12-01          195971

Are the Hydraulic hoses connected on the control on correctly? ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login