Go Bottom Go Bottom

Kubota B219 loader

View my Photos
GR Avos
Join Date:
Posts: 1
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2007-01-28          139223

I have a Kubota B6100 w/ a Kubota B-219 loader. It was not used for years (the loader). I recently reconnected it and found that "something" is missing on the loader's lever controls. Does anyone know how the bottom of each lever is connected. There is a hole at the bottom end of each lever, but whatever was connected there is missing. The levers are still connected to the pistons at the controls, but since the bottom is unattached they just flop around and are very difficult to work. Can anyone advise me? Thank you.

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Kubota B219 loader

View my Photos
Art White
Join Date: Jan 2000
Posts: 6898 Waterville New York
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2007-01-28          139278

There are normally small headed pins that take a cotter pin to hold them in to hold the control levers in place. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Kubota B219 loader

View my Photos
markCT
Join Date: Mar 2007
Posts: 2 ct
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2007-03-31          140895

would you sell the loader as-is off of it, if so how much thanks ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login