Go Bottom Go Bottom

PTO Adapter

View my Photos
walterep
Join Date: Nov 2003
Posts: 4 Vermont
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2006-05-19          129577

I want to use a flail mower with a 1" X 15 spline shaft on a tractor with a standard 1 3/8" X 6 spline output. Both are 1000 rpm. The best way to accomplish this would be to convert the mower spline to a 1 3/8" X 6 spline with an adaptor. I haven't been able to locate one. Does anyone know of a source?

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



PTO Adapter

View my Photos
JasonR
Join Date: Jan 2006
Posts: 142 Northern Indiana
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-05-19          129583

Can you take the 1" x 15 spline adapter off the mower? If so, what size shaft is it mounted on. The link below is for a PTO shaft adapter to a 1 1/8" shaft. I would think you could get a bushing to go from a smaller shaft to the 1 1/8" shaft, if required.

Jason ....


Link:   

Click Here


 
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



PTO Adapter

View my Photos
Art White
Join Date: Jan 2000
Posts: 6898 Waterville New York
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-05-20          129636

Replace the yoke with one that fits without the adapter! ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login