Go BottomFuel cam replacement on kubota
 | mjw
Join Date: Jul 2003 Posts: 31 Winchester, VA 
|
2003-05-19 55097
Hi all, I'm replacing the d950 in my kubota b8200. I got a remanufactured engine but the fuel cam has the wrong end for the hydo pump. I want to swap the cams and I'm wondering, are these cams press-fit into the bearings they ride on ? The cam is in awful tight and I don't want to force it out. Service manual shows how to remove it but I could use some advice from any engine rebuilders out there. I've removed the fuel pump and the plate that holds the cam in place but it won't slide out as I'd expect. I've build gas engines but this is my first venture into the diesel engine world.
THanks !
Reply to |
Quote Reply |
Add PhotoFuel cam replacement on kubota
| mjw
Join Date: Jul 2003 Posts: 31 Winchester, VA
|
2003-05-20 55165
Nevermind all, I got it free last night. A little tap on the back with a hammer and out she came. Just get a bit nervous forcing internal engine parts i guess. Sure I hope I got it timed right now !
....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This