Go BottomMitsubishi D2050 Alternator
 | Steve7385
Join Date: Apr 2015 Posts: 6 
|
2015-04-05 192470
Can anyone provide some help with the alternator wiring on a Mitsubishi D2050? The tractor runs great but the alternator has a 4 wire plug in on the back that is not hooked to anything, preventing the alternator from charging the battery. The alternator has a power cable running to the starter, but the wire coming out of the plug are cut. There are: 1 black wire, 1 black with yellow stripe, 1 white with red stripe, and 1 white with black stripe.
If anyone could help, I would be greatly appreciative. That is the only thing keeping the tractor from running without problems.
I can provide pictures if needed. Thanks in advance.
Steve
Reply to |
Quote Reply |
Add PhotoMitsubishi D2050 Alternator
| Steve7385
Join Date: Apr 2015 Posts: 6
|
2015-04-05 192471
Alternator plug. Mitsubishi D2050 ....
Picture Link
Reply to |
Quote Reply |
Add PhotoMitsubishi D2050 Alternator
| Steve7385
Join Date: Apr 2015 Posts: 6
|
2015-04-05 192476
If it helps at all, I checked each wire with a multi meter and the white wire with the red stripe shows a volage output when the tractor is running. That is the only one that shows any voltage when tested. ....
Reply to |
Quote Reply |
Add PhotoMitsubishi D2050 Alternator
| sharkblood
Join Date: Mar 2015 Posts: 6 Romania
|
2015-04-06 192477
Does it show any voltage only with the ignition on, while the engine is not running? ....
Reply to |
Quote Reply |
Add PhotoMitsubishi D2050 Alternator
| Steve7385
Join Date: Apr 2015 Posts: 6
|
2015-04-06 192478
No voltage on any alternator wire with the ignition in the on position. There is only voltage when the tractor is running. The key switch has a wire to the starter on the "starter position" to crank, but there is nothing connected to the key switch in the "on position" except for a wire going to the fuse panel (for lights). ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This