Go BottomTG1860 HYDROSTAT PROBLEMS AFTER F-CHG
 | koechner
Join Date: Apr 2004 Posts: 1 Missouri 
|
2004-04-19 83578
I RECENTLY CHANGED THE HYDROSTAT FLUID IN MY TG1860G. SINCE THE CHANGE THE TRANSMISSION HAS NOT WORKED PROPERLY. AT LOW RPM'S IT WORKS ALMOST NORMAL. AT HIGH RPM'S IT ACTS AS THOUGH IT DOESN'T HAVE ENOUGH POWER TO PULL IT'S SELF. I'M CERTIAN I HAVE CAUSED THIS PROBLEM IT WORKED PERFECT PRIOR TO THE CHANGE. ANY IDEAS OR SUGGESTIONS WOULD BE APPRECIATED.
Reply to |
Quote Reply |
Add PhotoTG1860 HYDROSTAT PROBLEMS AFTER F-CHG
 | Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York 
 Pics
|
2004-04-19 83663
Is the level to high or low? It sounds like it isn't getting enough oil. ....
Reply to |
Quote Reply |
Add PhotoTG1860 HYDROSTAT PROBLEMS AFTER F-CHG
| TomG
Join Date: Feb 2002 Posts: 5406 Upper Ottawa Valley
|
2004-04-20 83692
Similar to Art's thinking, if filters were changed was a dealer filter or after-market substitute used? Were any screens cleaned? I'm assuming the oil is right for the tractor. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This