bx2200 steering problem
| bross52
Join Date: Sep 2004 Posts: 4 Illinois
|
2004-09-05 95647
I have a bx2200 purchased in 2002. My brother in law purchased one at the same time. This year we started having problems with the tractor not holding a straight line while mowing. We contacted our dealer only to fine out he wasn't a kubota dealer anymore. He did however say there was a service bulletin on this issue. Supposedly bx2200 kubota's in a certain serial number range has defective parts (or parts that wear out too soon). Has anyone else had this problem and did kubota take care of this since it seems to be a defect in workmanship. Any help would be appreciated.
Thanks
Reply to |
bx2200 steering problem
| Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York
|
2004-09-06 95672
Get to a dealer as that is a warrantee issue. ....
Reply to |
bx2200 steering problem
| bross52
Join Date: Sep 2004 Posts: 4 Illinois
|
2004-09-06 95682
Will it still be covered even though the warranty has expired. I looked at my receipt this morning, tractor was purchased in 2001 instead of 2002. ....
Reply to |
bx2200 steering problem
| cthonestguy
Join Date: Jun 2004 Posts: 267 northeast
|
2004-09-06 95729
Don't discount the posibility you may have uneven tire pressure. This could be a cuase. I am sure you checked it but if they are off a few pounds on each side that will cause it to pull to one side. I have a BX2200 2001 and have had no problems other than leaky tires on one side to cause exactly what you mention. ....
Reply to |
bx2200 steering problem
| ballroger
Join Date: May 2006 Posts: 0 tallahassee florida
|
2006-05-21 129651
i have a 2000 bx 2200 with steering issues on 2nd steering unit. the first was replaced under warrenty. has anyone found ways to repair the steering unit ....
Reply to |
bx2200 steering problem
| Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York
|
2006-05-21 129661
what repairs were made? ....
Reply to |
bx2200 steering problem
| Gearhead
Join Date: Jul 2005 Posts: 75 SEVEN mILE OH
|
2006-05-26 129929
The steering cylinder is bad. The cylinder gets worn or not machined right or rust and fliud passes around the piston seal. ....
Reply to |

Share This