Go Bottom Go Bottom

leak in loader control box

View my Photos
flatom29
Join Date: Jul 2018
Posts: 12 brooksville fl
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2018-07-25          197876

I Have a Kubota L3010 4x4 Tractor with Loader-The Loader control box is leaking fluid whenever I am using it-I took it apart and seen the left piston Leaking fluid-I see there is a cover held by 2 allan wrench screws is there a seal under them that I should replace or would it be something Else Thank you

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



leak in loader control box

View my Photos
charlieK
Join Date: Feb 2004
Posts: 136 kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2018-07-26          197882

if it has a kubota loader control box a dealer may help ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



leak in loader control box

View my Photos
Art White
Join Date: Jan 2000
Posts: 6898 Waterville New York
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2018-07-30          197892

You half to remove the plunger to check for the failed part. When you remove the bottom cover be careful that you don't loose any parts. Has the detent been working for float? ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



leak in loader control box

View my Photos
flatom29
Join Date: Jul 2018
Posts: 12 brooksville fl
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2018-07-30          197893

I took the cover off and seen the left piston leaking around it and seen there was 2 screws holding a bracket down around it so I have never done anything like that so I didn't want to mess anything up,the bucket works ok it just leaks below the box and I seen why ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



leak in loader control box

View my Photos
flatom29
Join Date: Jul 2018
Posts: 12 brooksville fl
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2018-07-30          197894

Quote:
Originally Posted by Art White | view 197892
You half to remove the plunger to check for the failed part.When you remove the bottom cover be careful that you don't loose any parts.Has the detent been working for float?
- Detent for float ? ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



leak in loader control box

View my Photos
flatom29
Join Date: Jul 2018
Posts: 12 brooksville fl
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2018-07-30          197896

the loader works fine it just leaks from the left piston and I am trying to fix myself-Just have never worked on a tractor before just cars and trucks ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



leak in loader control box

View my Photos
Art White
Join Date: Jan 2000
Posts: 6898 Waterville New York
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2018-08-03          197899


The detent is for the float position ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



leak in loader control box

View my Photos
flatom29
Join Date: Jul 2018
Posts: 12 brooksville fl
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2018-08-04          197900

Quote:
Originally Posted by Art White | view 197892
You half to remove the plunger to check for the failed part.When you remove the bottom cover be careful that you don't loose any parts.Has the detent been working for float?
Do you know where dip stick is Located on L3010 HST its not on floor like others they show on utube ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login