Go Bottom Go Bottom

4410 drive issues

View my Photos
50caleagle
Join Date: Jun 2018
Posts: 2 Washington State
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2018-06-26          197823

I am working on a 4410 that #1 will not go into 4x4. After the switch is activated and power is applied i can hear a grinding noise from the front dif. The front shaft is turning. #2 the rear dif will not lock when the dif lock pedal is pushed. The left tire will spin but no power to the right; i can feel the pedal pulsing as power is applied. Where do i start? Thanks much from a newbie! :)

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login