Go Bottom Go Bottom

AMT 626 Dump bed

View my Photos
dsimon20
Join Date: Jul 2017
Posts: 3 Defiance MO
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-07-24          196896

The hydraulic dump bed no longer works. I noticed the power cable broke from the battery terminal, replaced the eyelet and still not working. Any help to troubleshoot and get this working again.

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



AMT 626 Dump bed

View my Photos
JLMiller
Join Date: Aug 2010
Posts: 32 Deerfield or Sanford, wherever the weather's nicer
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2017-07-24          196898

Quote:
Originally Posted by dsimon20 | view 196896
The hydraulic dump bed no longer works.I noticed the power cable broke from the battery terminal, replaced the eyelet and still not working.Any help to troubleshoot and get this working again.


Use a multimeter to check for power to and from the raise/lower switch and at the relays. Use the resistance setting on the multimeter to check the grounds at the relays. Use a jumper from the battery to each relay coil to exercise them and use the resistance setting on the multimeter to check continuity across the NO & NC contacts. Use two jumpers from the battery to power the lift cylinder directly and observe whether it extends and contracts. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login