Go Bottom Go Bottom

amt 622 hyd pump issues

View my Photos
burninrubber
Join Date: Mar 2011
Posts: 4 elma new york
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2011-03-26          177614

hey everyone, ive just aquired a john deere amt622 thats in pretty good shape, shes missing the front plastic nose piece(old oner put sheet steel plate over), needs transaxle bearings on front shaft, and has a bent shaft on driver side, other than that she runa amazing and aint rotted out at all, best part is i only paid $200 bucks for it. i was messing around with the hyd dump bed last nite after i removed the old bearings and axles and found it dont go all the way up and it goes up real slow, but when you lower it its actually pretty fast, ive checked the fluid, connections, ect but am unsure if theres a filter in the resivor or not. any one have any ideas? thanks in advance

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



amt 622 hyd pump issues

View my Photos
gatoraider
Join Date: Nov 2008
Posts: 544 Maryland
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2011-03-27          177624

There is a screen in the unit inside the tank. When you lower the bed it is basically free wheeling and the weight of the bed dictates how fast it goes down. This is done so you can pick it up manually if it or the battery fails. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login