Go Bottom

---

Kawasaki FD620D engine flywheel query

fernglen Join Date: Jul 2009 Posts: 6 New Zealand

2009-08-11          164855

I need to remove the flywheel..... does it require a special JD puller? If so, can anybody tell me the part number please?

Reply to | Quote Reply | Add Photo

---

Kawasaki FD620D engine flywheel query

gatoraider Join Date: Nov 2008 Posts: 544 Maryland

2009-08-12          164862

I'm sure the right person would tell you to get a puller. My puller is two medium to large flat blade chisels wedged between the flywheel and the case with a couple of light taps and a whack on the end of the crank with a BIG hammer. I think Deere thinks we take them off that way too, that's why they don't have threads all the way out. They always come off for me. I'm sure a large straight bar puller would do the trick too. There are holes drilled opposite each other for the alternator pulley ....

Reply to | Quote Reply | Add Photo

---

Kawasaki FD620D engine flywheel query

fernglen Join Date: Jul 2009 Posts: 6 New Zealand

2009-08-13          164893

Okay... many thanks for that. Just one last question, and a really silly one at that. I'm having a lot of difficulty getting the nut off; from what little thread is exposed it looks like a standard thread, i.e. anti-clockwise to unscrew. Is that right? ....

Reply to | Quote Reply | Add Photo

---

Kawasaki FD620D engine flywheel query

gatoraider Join Date: Nov 2008 Posts: 544 Maryland

2009-08-13          164894

Yes sir, anti-clockwise as you say. I always do it with an impact gun so I really don't know how it would be by hand. Torque spec is only 80 ft/lb. ....

Reply to | Quote Reply | Add Photo

---

Kawasaki FD620D engine flywheel query

fernglen Join Date: Jul 2009 Posts: 6 New Zealand

2009-08-13          164928

Thanks again.... I'll try a bigger hammer! ....

Reply to | Quote Reply | Add Photo


   Go Top


Share This

Create New Member Account

Member Login

Userid:

Password

Login

Ask A Question !