Go BottomJinma backhoe attachment
 | RedCompact
Join Date: Dec 2004 Posts: 10 Sedona, AZ 
|
2004-12-13 102205
I just added a backhoe attachment to my Jinma 224. It seems back-heavy - has anyone out there had experience with the backhoe on a compact & have you experienced any limitations?
Reply to |
Quote Reply |
Add PhotoJinma backhoe attachment
| Henry G
Join Date: Jan 2005 Posts: 1 washington
|
2005-01-11 103998
is this the Jinma, frame mounted backhoe? ....
Reply to |
Quote Reply |
Add PhotoJinma backhoe attachment
| RedCompact
Join Date: Dec 2004 Posts: 10 Sedona, AZ
|
2005-01-13 104180
No, it's a 3 point, but does not run off the PTO, has its own sealed box. ....
Reply to |
Quote Reply |
Add PhotoJinma backhoe attachment
 | AC5ZO
Join Date: Jul 2003 Posts: 928 Rio Rancho, NM 87144 
 Pics
|
2005-08-01 114198
I have had a backhoe on my compact tractor for years. I also have a front end loader. When I take the backhoe off of the tractor, the rear end can feel light as the backhoe provides adequate ballast to offset the loads in the FEL. A similar thing happens if the backhoe is used without the FEL but the front end gets light. It comes down to a matter of weight balancing on the tractor.
When I use the backhoe I pretty much lift the tractor off the ground with the FEL and backhoe stabilizers. I never use the backhoe without the FEL. My backhoe is a frame mounted unit. It is quite powerful and will move the anchored tractor around when I am in tough digging. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This