Go Bottom

---

Hydraulic problem E1804

gogo647 Join Date: Posts: 1

2004-07-02          89946

Hi,
Can anyone give me some advice on what might be the problem.
It was working fine and then it stopped. I checked the fluid, filter, hoses, and whatever else I could look at. I pull the handle back to raise the 3 point up and nothing happens. If I rev the engine up pretty high , It barely will move up. It seems like there isn't enough pressure or something. If anyone has any idea's please let me know.

I'm new to the tractor scene.
Thanks

Reply to | Quote Reply | Add Photo

---

Hydraulic problem E1804

TomG Join Date: Feb 2002 Posts: 5406 Upper Ottawa Valley

2004-07-03          89964

Does it have a loader and if so does it work normally? If it's a used tractor and you don't know the maintenance history, I'd change all fluids and filters, and clean and screens on general principal. If it does have a loader I'd jiggle the loader valves to ensure they're centered. On most tractors the 3ph won't lift when a loader valve is active. If a loader valve is 'feathered' you may not notice that the loader is creeping at low rpm. My used tractor did that a time or two until I changed the hydraulic oil and filter.

After this easy stuff there are some specific things to check if it's still not working. ....

Reply to | Quote Reply | Add Photo


   Go Top


Share This

Create New Member Account

Member Login

Userid:

Password

Login

Ask A Question !