Go Bottom Go Bottom

Cub Cadet HDS2165 no power Next steps

View my Photos
joey74
Join Date: Jun 2021
Posts: 2 vincent ohio
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2021-06-14          200382

Working on cub again after refreshed the engine with new pistons and rings.it's a16 hp v twin engine briggs . It sputters up a hill and won't run the deck.

It also has a oil leak somewhere from top so resealing the valve cover. It had oil spraying out of carb or breather before refresh and was told it needed rings .

What te heck is wrong with this thing. Thanks joey!



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Cub Cadet HDS2165 no power Next steps

View my Photos
Unclebob
Join Date: Feb 2021
Posts: 10 New England
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2021-06-18          200386

So what you describe sounds like blow by. One of the causes can be worn pistons and rings. The other is the cylinder head and valves.

If you honed the cylinders yourself with a handheld honer that can be dicey as you are guessing instead of using a shop suited for precision.

The head can have issues worn rods bad valves, bad timing.

May be other issues like cracks.

Best of luck. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login