Tractorpoint Search for

tractorpoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors, Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images

parts | discussion | photos | podcast | reviews | specs | dealers | classifieds | contact | faq | myProfile | home Login Now | Sign Up

Search for =

Topic

Keep in mind the best pumps run at about 85% efficiency, cold. As the fluid gets hots, the efficiency drops. There are losses through the hoses, fittings, and most important, the valve. Add all of that to the efficiency of the drive motor.

Ratings on power equipment are variable,... being kind. A 20 ton log splitter will probably generate 75 to 80% of that in the field. Theoretically, it can produce 20 tons of pressure. The net "bore" of a hydraulic cylinder can also be somewhat different than the published bore. You need to get manufacturers specs to get the net bore.

Ever tried to get 21mpg's out of a 5.7 litre Silverado. You better have the wind at your back, going downhill, ..and leave the beagles at home. I haven't gotten it all right yet.

Calculating hydraulic tonnage rating
Tractor Projects
Replies 22 Post by beagle

This whole thing has really sent our radar spinning. I have done more price comparisons since the air filter fiasco, and the results are amazing. It turns out my dealers prices are 30% higher than we can get parts for at dealers that we haven't bought equipment from. Of course, them there's the idiot that tries to sell it for 250% over list.

My father worked for GM Service parts for years, purchasing and pricing service parts to be sold to the dealers. I wish he was still here to ask him what the proces was.

Dealer Pricing System
Kubota Tractors
Replies 47 Post by beagle

Well at least I can bend over and slide the manual overide to get them to actuate. Just have to juggle the cup of coffee, cell phone, message pad, and oh ya, driving at the same time.

Electric Brake Controler
Pickup Trucks and Trailers
Replies 14 Post by beagle

Thanks for the reminder. Blew out all our air filters last night. Probably time to replace them.

Thanks again.

Tractor running hot
Parts and Repair
Replies 2 Post by beagle

I'm sure you noticed by now that you get a decent uplift at the hitch when you dump. Make sure you account for then in your ball hitch. Can't hook up to the 3-pt, have to use the drawbar when dumping.

Adding hydraulics to dump trailer
Pickup Trucks and Trailers
Replies 79 Post by beagle

An hour and a half is a long time for it to be heat related. The tractor is at operating temperature within 10 minutes, so that would be down the list a little first. With a diesel, if it is running too hot, you would probably know it.

I would stick with the fuel and shut-off solenoid first. One changing of the fuel filter isn't a sure thing. You may have to repeat the process. Also make sure fuel is getting to the filter. There could be a restiction at the tank.

The breather cap at the tank is another strong possibility. Once the vacuum formed in the tank, it would explain the 10 second run time. If the breather is blocked, that vaccum could take some time to form, then would restrict the fuel flow to the engine until the tractor sat long enough for the vacuum to leak off. Try running the tractor without the fuel fill cap on. Easy enough to test.

Won t Start - Help
Case
Replies 10 Post by beagle

Would that work with beagles? We have three of them at the house...

How I added three horse power to my tractor
Just For Fun Off Topic
Replies 7 Post by beagle

The difference between the L Series and the Grand L is similar to the difference between the B7800 and the B3030. The Grand-L offers more of the "premium" features than the L, and has some of the newer technology.

The 1/4" valve for the 3-pt is a pain in the *$$ to get used to. That is, ...as I have posted several times..., the drawback of the 7800. But like everything else, you get used to it. We also have a Position Indicator that tells the operator the exact setting of the 3-point arms. It won't put it there, but it tells you when you have it where you want it. Still not a replacement for position control.

Kubota B3030 vs L3400
Kubota Tractors
Replies 9 Post by beagle

It's always best not to turn shaply in 4wd on a hard surface. If you are on pavement, keep your turns to as wide as possible. The moaning you are hearing is the 4wd trying to compensate for the differential turning radius between the 2 wheels. I think the tractor is trying to tell you something.

Always a good idea to check and keep the fluid levels clean and full.

faint howling sound in 4wd
Kubota Tractors
Replies 4 Post by beagle

The suction line is probably on the left side of your tractor, near the rear axle housing. Check your owners manual, it will tell you exactly where it is for your tractor. You can do your tractor a lot of good by making sure it is clear. It will be a hard plumbed line with a 17 or 18mm bolt head into the transmission reservoir case.

I agree, the last place you want to save $ is on your filters. Especially the hydrostat filter, since all hydrostats are created somewhat differently. You need to make sure the filter is matched to the hydrostat system.

2 filters for the hydraulic fluid
Kubota Tractors
Replies 9 Post by beagle

The "limited" usually refers to the lift height ability. You are limited since the arms are short. With most "limited" cat 1 hitches, the spread can be Cat 0 spacing (21") or Cat 1 spacing (26"), with cat 1 pin sizes, and can only accomodate 12" moldboard heights as opposed to 16-17" moldboards on full Cat 1 implements. You just can't lift some Cat 1 implements high enough to make them useful. Some sub-compacts and garden tractors can only accomodate Cat 0 spacing.

About all the subcompacts from all the manufacturers are "limited" Cat 1 implements.

3 point hitches on 2520 2320 and 2305 - limited cat 1
John Deere Tractors
Replies 10 Post by beagle

Your tractor is an open center system. The 3-point hydraulics are not external to the tractor(the hydrauics that actuate the 3-point lift, so you wouldn't see hoses. are you describing a remote system that is already on the tractor?

The best way to run a remote circuit is from a power beyond port on either an existing valve or the hydraulic block on the tractor. All four way spool valves require 4 ports to operate. In - out - and two pressure work ports. With an open ceter system, you need to make sure you don't dead-head the pump, or use exhaust flow to try to run a circuit.

Take a look at our pics. The remote system on this tractor is run off the FEL PB. The plugs and hoses are all run under the tractor, and up along the drivetrain.

If you can describe exactly where the 3-hoses that come from the back of the tractor are that you were describing, I'm sure we could figure out a circuit that would work for you.

Beagle

remote hydraulics installation
Kubota Tractors
Replies 3 Post by beagle

I am just a hard headed Italian business owner. Maybe not intelligent enough to turn tail, but we are actually trying to expand our business in Michigan. We have a new facility we are building in the Mid-Michigan area, and want to try to help ourselves by helping the people of the state.

Yep, things are as different now as they are the same as the 80's. The prospect for improvement can only come from the people of Michigan. The cure will not be the same as the 80's, because as you point out, the disease is different. But.......we remain convinced there is a cure, and nobody will find it for us.

Just one last thought, the germ that attacked the Michigan economy will spread. There isn't anything in Michigan that made us the only ones vulnerable, it just showed up here first because of the economic basis of the state. This economic disease will effect everyone eventually, until a cure is found.

SW Michigan Relocation
Parts and Repair
Replies 56 Post by beagle

Price seems comparable to what we paid 2 years ago, so you are getting a reasonable deal. The f-series includes the folding roll bar and the mid pto. Make sure you are getting the f-series 7800.

As far as the old Blue vs. Orange vs. Green,... same old story. Pick the machine you are most comfortable operating from a dealer you would be comfortable doing business with on a continuous basis.

Besides that, it's personal opinion.........the fronts of the Blue Tractors have become uh...ugly?

Have fun with your tractor, whatever color it is.

B-7800 HSD-F Price check
Kubota Tractors
Replies 7 Post by beagle

10" x 10" Southern Pine timbers will work at the 32' span, with 24' of double timber girder as shown in Pic. 20.

Beagle

bridge for Island
Garden and Landscape
Replies 102 Post by beagle

Thanks SG, but it's not my compactor. I think the ideas got shared to the right folks.

LOOKING FOR IDEAS TO SOLVE PROBLEM
Loaders Back Hoes
Replies 16 Post by beagle

We use a 72" blade at times. No porblem for a rear angling blade. For a box blade, I would stick to a 60". It's wide enough to do what you need, but won't be too much to pull.

Size of Rear Blade for B7800
Kubota Tractors
Replies 5 Post by beagle

Behave yourselve Murf, but not too much.

Blow this popsicle stand
Just For Fun Off Topic
Replies 16 Post by beagle

The 2 to 1 rule is also a good rule for sizing the reservoir. If the system capacity is 1.5 gallons, you need a 3 gallon reservoir as a minimum.

We use 5 gallon reservoirs and don't notice any heat build up, even with continuous use.

Log splitter questions
Operating and Attachments
Replies 8 Post by beagle

Depending on the type of boom pole set up, the top link can really take a beating. If the vertical distance between the lift arms and the top link is 1.33', anything further behind the lower arm pins than 1.33' will multiply the tesion on the top link bracket. In other words, if you lift 1000lbs 2.66 feet behind the link pins, you will generate 2000 lbs of tension on the top link bracket. Your three point is probably rated at 24" behind the pins, stay within the recommended distance and weight. Going further than that could ovestress the top link bracket.

3 Point Boom Pole
Operating and Attachments
Replies 8 Post by beagle