Tractorpoint Search for

tractorpoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors, Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images

parts | discussion | photos | podcast | reviews | specs | dealers | classifieds | contact | faq | myProfile | home Login Now | Sign Up

Search for =

Topic

Hate to say it, but it sounds like something is bent in the loader frame and/or mount to the tractor. The cylinders will tend to equalize since they are on the same hydraulic circuit. That is why it's OK at the extremes. Most loaders have some sort of torque tube connecting the two arms and that's really all that keeps the arms even. Have someone slowly raise the loader to the stops while you CAREFULLY watch for flexing. It will likely flex when one arm hits the stop until the other one catches up. Wherever it flexes is probably the area that is bent. Not sure how to fix, perhaps the dealer or a frame shop? Hope this helps, Rob.

Loader Maintenance
Parts and Repair
Replies 14 Post by Rob

Thought I'd share my first impressions for those still tractor shopping...I chose the 790 for value and I've always been fond of Green tractors. Never owned anything bigger than my Craftsman lawn tractor previously but I did use a friends' Kubota years ago. Both my wife and I prefer manual transmission vehicles, so the GST was a natural for us. I got the tractor with R-1s, loader, 513 cutter and mid-PTO for the future. First thing I did was put a tow hook on the bucket (very handy). I've since cut the weeds on 7 of our 10 acres and borrowed a 7 1/2 foot disc to smooth out the land. All has gone well so far. Mower ate some rocks and other rocks broke a couple of disc blades (it is very old and rusty). Picked up five loader buckets full of rocks. I've mastered turning brakes and even had to use the diff lock while discing. I was concerned about the TPH lift capacity, but it's been fine even with this large disc. I'm looking forward to putting in a culvert and some tree planting in the near future, as well as more rock picking. Thanks to all the other members who helped with my decision. Rob

790 20 Hour Impressions
John Deere Tractors
Replies 2 Post by Rob

Duane
I am doing the same search that you are. Here are a few products that I have found. "Steinerturf.com" a steiner LS340 lawn sweeper - its made to jam grass, leaves, sticks and other debris into it's hopper. It's a two stage system, I had a demo and the unit worked great. It picked up rocks sticks apples etc. It cost around $2400.00. " Wickco.com" has a model 136 estate groom sweeper - Heavy duty and they say "The brush has the power to pickup leaves, pine needles, wet or dry grass clippings, and other similar debris" it cost $795.00. The really nice units are made by "Trilo.com" but are pretty expensive. I am trying to find out the actual price and were I can get one. If you get any information on units like these please let me know.

Happy Tractoring
Phil

Something to pick up walnuts
Kubota Tractors
Replies 34 Post by Phil Serre

Congratulations and I'm sure this is unneccessary but ... ENJOY. You'll be surprised at just what you can do with the little beauty. You'll be looking for projects so you can sit on it and play.

Just picked up my Kubota 7500 Awesome
Kubota Tractors
Replies 5 Post by Frank R Taylor

I tried to get another NH price on Saturday but arrived 15 minutes after they closed. I did get to look at some NHs and Kubotas side by side and then some Kubotas and JDs side by side. The Kubota 2910 is much smaller than either the 4300 or the TC33D. The L3010 was more matching in size. Any thoughts on how the L3010 compares to the 4300/TC33D? The Kubota web page seems to be light on specs when it comes to loader/3PH lift capacity. I plan to go to the same two dealers when they're open next weekend and get some prices.

4300 vs 4400
John Deere Tractors
Replies 25 Post by tjb

I also have a JD790, and do not think I would want anything over 1000 pounds hanging on the rear, wouldn't be able to keep the front end on the ground. I have used a boom to pick up several desiel engines weighting in around a 1000 pounds and had to have the loader bucket full of cinder blocks to keep it on the ground. Look around, there are not many implements for cat 1 tractors that that heavy, the mower is about the largest.

JD 790 vs NH 1720
John Deere Tractors
Replies 3 Post by Halsey Green

I have an opportunity to purchase a JD 850, 2WD 1980 tractor with 354 hrs for $5500. It
is currently running on only 1 cylinder but the seller will fix this before
selling it to me. This tractor has been stored out in the rain and is not the
prettiest around. It comes with a tiller, disc and 2 blades (all pretty
rusted)Any thoughts on what it is worth and whether this is a fair price?
Thanks is advance!

JD 850 price
John Deere Tractors
Replies 4 Post by G. Ponder

I work for a dealer of both Woods & Bush Hog. Every time I see a cutter question, I think "why do they call them ALL Bush Hogs?". I wouldn't own a Woods cutter, but that's just my $0.02. Price out common repair parts such as blades & blade hardware, include that info in your decision. A 'stump jumper may be optional equip on the Woods, don't buy one without it. The new series of Squealers (3 digit #'s) are quite a bit stouter than the old series.

Bush Hog vs Woods rotary cutters
Mowers Field and Finish
Replies 5 Post by RickB.

You're Welcome, Hillbilly, and thanks for the accolades. Of course, a great deal of the information I have I learned from reading these two discussion boards.

Buying direct
John Deere Tractors
Replies 3 Post by Bird Senter

I AM STILL LOOKING FOR INFORMATION ON ADDING POWER STEERING TO MY B9200 KUBOTA. I UNDERSTAND A KIT FOR POWER ASSISTED STEERING IS NO LONGER AVAILABLE FROM KUBOTA. DOES KUBOTA OR ITS DEALERS HAVE ANY NEW OLD STOCK ? DOES A POWER STEERING GEAR BOX FROM A 2150 MODEL FIT A 9200? DOES ANYONE KNOW <br>ANY SALVAGE TRACTORS? ANY HELP WOULD BE APPRECIATED. THANKS.

9200 kubota power steering
Website Operations Howto
Replies 2 Post by Jim Seylar

find a dealer who handles titan wheels. i saved app 20%. i put a set of 19.5L x 24 Turf and Fields on my 970. traction up slopes is just as good as the 13.6 x 28 that i replaced. traction in mud is not as good as R1's. i had to fool a bit with front tire sizes as i have MFWD. the ratios for the 950 is 1.750.

ken

950 JD Wheels and Rims for Ag Tires
John Deere Tractors
Replies 6 Post by ken dyck

I have used a stand alone splitter on and off for 15 years purchased from Northern Tool to split about 40-50 cords of wood and it does a great job and is still running strong...24" x 4" cylinder, 5 HP engine (still goes for about $900)... Am also considering getting a 3PH splitter as the stand-alone belongs to my dad and a bit hard to get a hold of when I need it.

I have a JD 870 and think it has enough hydro capacity...my only concern is that the Northern splitter has a 2 stage pump which basically doubles splitting force when splitting a piece of tough wood which seems to really help at times when it kicks in...the JD hydro is only "single stage" and I am a bit concerned as to what will happen when it gets over-loaded by a pice of tough wood. I always try to not overload the Northern splitter, but every now and then can see the advantage of the 2 stage pump when it 'down shifts'.

Was thinking that maybe next time I get a hold of the splitter I can 'splice it in' to my aux hydro on the JD and see how it performs. Another concern I have is the hydro on the splitter used 1/2" hoses/fittings vs 3/8" fittings on the JD...Seems the JD will somewhat restruct throughput to the splitter since I would have to adapt the hoses between the 2 parts of the system (3/8" to 1/2").

I believe that by the time I buy a valve/hoses/quick connects that the cost for the 3ph splitters is about $550 vs $900 for the standalone...not a bad price difference for a turn-key splitter with engine ready to go vs one I need to plumb into the JD.

Clear as mud? - MOJ

Log splitters
Operating and Attachments
Replies 7 Post by moj

In the Farm Show that just arrived( Vol.24, No.5,2000), on page 30 a New Zeelander has an attachment for chain saws that cuts a trench 1 1/2 to 2 inches wide and as deep as 25 inches,depending on the saw. The article says contact FARM SHOW Followup, Doug McFarlane Ltd.,33 Lincoln St., Hamilton New Zeeland (phone 011 64 7 8476734)<br>
FARM SHOW,www.farmshow.com is a wealth of nifty ideas,inventions from across the world and would appeal to most poster. They offer a free issue on thier web site but it's only 18 bucks a year (8 issues, I think) the "latest" issue featured on the web site with a sampling of articles is the one before the one I just got in the mail. FARM SHOW makes a unique gift for tinkerers and fixer, it has dozens of videos and CD-discs for restoring older tractors and back issues. Easily, it's the most interesting pulication I get.BTW,I have no proprietry interest in FARM SHOW, just a very satisfied customer.

trenching sprinkler lines
Operating and Attachments
Replies 12 Post by RCH

Hi,
I have the opportunity to buy an '84 Ford 1210, not sure of a price. The tractor is kinda beat up as it was used for cleaning out manure from a cow barn and mowing grass with a rear finishing mower. There are agricultural tires on it since it was used as a loader, and i was also wondering if you can get turf tires for it? It has HST transmission, and im not sure if its in running condition. Would it be worth it to buy it and overhaul/restore it for use with a belly or rear finishing mower? Also are the parts for it widely avaliable at New Holland dealers or are they hard to get? It is the same as the one in the picture below but in worse condition. Thanks for the help.
Kyle

Info Requested on Ford New Holland 1200 Series
New Holland Tractors
Replies 4 Post by Kyle McKenzie

Yes, it sounds plausible. Most important, it sounds organized. The most important thing I found back in my tech days in the military was having an organized idea. Being able to take a problem apart into several smaller chunks and testing in a way that verifies which components work eventually finds what doesn't work.

It sure sounds easier to start by checking supply lines rather than fishing around in the 3ph looking for internal leaks. Good luck.

Ford 1910 hydraulic problems
Parts and Repair
Replies 41 Post by TomG

You should check with www.greatbendmfg.com. I have been told (by my JD dealer no less) that the Great Bend loader (subsidiary of Bush Hog) is just as good as the JD loader, but costs 20% less $. Looking at the specs for the Great Bend and the JD model for my tractor, they are nearly identical. My JD dealer has a whole lot full of new Great Bend loaders and a couple of JD models. Go figure.

loader for a 10 50 john deere wanted
Loaders Back Hoes
Replies 4 Post by Jim Youtz

Chuck, thanks for the reply. I will definately use ballast of some sort. Talked to a very knowledgable person on chemicals and said windshield wash was a very bad choice. I was told it is corrsive and also very flammable. Waiting for the new 4300 to show up, can't wait to get it. How has your 4300 been for reliablity and power?

Mark

JD 4300 Winter Items
John Deere Tractors
Replies 17 Post by Mark

I have just over 100 hours on my 4300. I have kept fairly close tabs on my lug bolts since I purchased this tractor a year ago. About two weeks ago I was very surprised to discover ALL of my left rear lug bolts loose. The wheel was chewed up a little which may cause a problem in the future, but for now it seems to be fine. I tightened them back up and it was work getting them back in (roughly 3-5 turns each). I checked the other side and they were PERFECT. I backed a couple off on the right side to compare the effort required to get them torqued down and I had no problem at all. At the time I chalked this up to a less than perfect seat on the left side rear tire (but I may have a thread problem). Looks like I need to jack up the rear end of the tractor and check it out. Seems like John Deere may have a manufacturing problem to address under maintenance for all of us.

4300 wheel bolt problems
John Deere Tractors
Replies 72 Post by J.D. Braathen

I mean good luck!

A bunch of NH questions
New Holland Tractors
Replies 13 Post by tom

Kelly, I'm not enough of a mechanic to diagnose that problem, but I'd sure be calling the dealer. If there are no obstructions to the linkage and it's free, my shop manual mentions a possibility of a problem with high relief pressure and, if that's it, the dealer should take care of that.

Kubota 2910 HST Question
Parts and Repair
Replies 4 Post by Bird Senter