Tractorpoint Search for

tractorpoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors, Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images

parts | discussion | photos | podcast | reviews | specs | dealers | classifieds | contact | faq | myProfile | home Login Now | Sign Up

Search for =

Topic

I don't know the codes for the OEM but I know many dealers have new factory buckets sitting around from conversions to the Quick attach.

I do have them at the office!

Kubota L2500 LB400 FEL Need replacement bucket
Kubota Tractors
Replies 5 Post by Art White

If it can't be adjusted externally then it is internal.
For it to be changing is not good! You may have a problem in the control valve, the pressure tests should verify it.. It should be fixed as soon as possible for the integrity of the hydro.
Yes it does have to come apart!
Kubota mandates that service departments have appropriate training. Larger Kubota dealers might have more hands on experience for the repair.
It is rare that it would be anymore and not to common. In the industry hydro's reliability has been outstanding but from time to time things happen.

Kubota 3240 HST creeping
Kubota Tractors
Replies 2 Post by Art White

Sorry pto side not pro side. But you have to adjust the drive side first

How to adjust FOTON FT704 CLUTCH
Jinma Farmpro Agracat Nortrac
Replies 10 Post by jayshu

n189 switches panel

what do switches do on n189 hinomoto
Hinomoto
Replies 3 Post by kurtn189

hello. I just found this site and hope it works. i am pulling my hair out.
I have the n189. My hitch does not go up and down. I read on here about the silver knob below the seat , below my knees. So I went out and unscrewed it and great !!! it worked. I then went and backed up to my brush cutter and , then it wasn't working. I still cannot get it to work. After unscrewing the know it went up and down several times so I thought it was fixed.

On my model there are two toggle switches oh top of the right , rear fender. the front one of the two is silver , the "back" toggle is rubber booted. I use the front of the two to make the hitch go up and down.

Since it is electric , "toggle activated" I pulled lots of panels off checking in case a field mouse or something ate into the wire. I could only look partially into some of the areas so checked it as well as I could.

any suggestions.

I see there is a small relay looking thing on the back by the hitch. It appears wires from the toggle come to this relay. I don't know if it is in play making the hitch work and if so I don't know how to check it to see if it works properly

and lastly, I have no idea what all the knobs mean or are for on the right side panel. I don't know if maybe I have to set them a certain way to make the hitch go up and down.

thanks
Kurt

Hinomoto N189 3 Point Hitch Issue
Hinomoto
Replies 5 Post by kurtn189

I am looking for rebuild parts for the Shibaura LE892 engine. Also does anyone know of a replacement engine that will fit that tractor. Preferably a 3 cylinder.

Ford 1600 engine parts
Jinma Farmpro Agracat Nortrac
Replies 2 Post by bainehogan

I am looking for rebuild parts for the Shibaura LE892 engine. Also does anyone know of a replacement engine that will fit that tractor. Preferably a 3 cylinder.

Ford 1600 engine parts
Jinma Farmpro Agracat Nortrac
Replies 2 Post by bainehogan

Does your gator have a Kawi v-twin like my old mule? I recently had to replace the plastic cam gear on mine. If yours has the plastic one (new ones are steel), it may have skipped a tooth or stripped many teeth as happened to mine. Replacement, at least on the mule, is actually pretty easy. I would suggest pulling at least one rocker cover and checking valve movement and relationship to TDC. If the cam has stopped with valves closed on one cylinder, this can make it seem like it has compression. If the engine cranks but the valves don't go up and down, you've found your problem. If you need to change cam gear let us know.

01 Gator HXP 4x4 cranks will not start has fuel spark
Utility Vehicles UTV/ATV
Replies 14 Post by Trainpilot

I recently picked up a 2004 JD4310 w/power reverse (1200hrs) as a project tractor. The owner said it wouldn't start and it was weak in reverse. I fixed the starting issue, changed ALL fluids and filters, cleaned the screen intake filter, and lubricated all the clutch linkages. It works perfectly except its still weak in reverse. When I engage reverse (via power reverser or using the clutch) there's about a 5 second delay before it moves(no delay for forward). It feels like it's struggling to get into reverse. It will reverse 1st- 4th gear in range A and 1st-3rd in range B. After that it's too weak. Once it's moving in reverse it is strong(I pulled a 3000lb block of concrete). The higher the gear, the longer it takes to engage. Higher RPM's do not speed anything up.I have swapped the forward and reverse solenoid valves and transducers which didn't make any differance. The tractor isn't flashing any codes and the light does work. The only other thing is it will not disengage the 4wd but that shouldn't affect reverse and I just haven't got to trouble shoot that yet. I do have the service manual but I'm hoping someone has run across this before. Thanks in advance for any information.

John Deere 4310 reverse problem
John Deere Tractors
Replies 7 Post by Rsimon804

Hey can you tell me how long these draft lengths are for the John deer 4000, I have a fx 32 yanmar and i'm wondering if the John deer will fit. I didn't know how hard these telescoping draft lengths were so hard to find. All the parts people I've talked to don't seem to know the length. That's all I need to know is the length shortened up on center. Thanks for your help

Telescoping draft links
John Deere Tractors
Replies 17 Post by sholsclaw

Youngen! Why when I was that young could climb two trees jumping back and forth between them. Wait maybe that was the monkeys tossing me between them. Oh well about same just little difference there.

It has been years since I put on set of spurs and climbed a tree, some what enjoyed the little I have done. Would not want to have to drop in sections as you talked about. Got good at tossing a light weight and strong string over a major limb and then pulling up usually a cable to wrap around the tree for pull from say 20 feet to even 30 feet height. Only had one that did not go great and that one proved the need for a heavier tow vehicle than a compact pickup with 2 wheel drive! Tree dragged it like wet doll baby.

Not sure if the 8 years difference is the more major issue or the 80 pounds as to climbing a tree. Be safe and send more pictures. kt

Elm Tree Removal Minot North Dakota
Garden and Landscape
Replies 13 Post by kthompson

Hey, my secondary just did that my rivets broke , is there anyway to fix it anybody out there know of an idea?

4 x 2 Gator Secondary Clutch Rattles
Utility Vehicles UTV/ATV
Replies 11 Post by Jamieporrok

Hydraulic Block

Cub Cadet 7360 addiing rear hydraulics
Cub Cadet
Replies 41 Post by chashm

Have you tried spraying it with wd40?

JD 655 help removing mid-mount mower
John Deere Tractors
Replies 11 Post by DennisCTB

He had pulled a couple of pine tree stumps a couple years ago and where the roots had rotted and stumps were removed left the ground ruff. It was beating him up mowing it with his rider, so I got a chance to try the new tiller out. I made just one pass in granny low. Were on clay and it looked pretty good. I waited about 3 hrs figuring I'd let it dry and went back over to hit it again and he'd already seeded it. He was satisfied with one pass.

Got New 3PH Tiller or Toy Today
Operating and Attachments
Replies 17 Post by yocsr1

Common problem is the tractor end of the negative cable. Remove it completely, clean both ends with a wire brush. Then concentrate on the area where you unbolted it from the frame. Wire brush the bolt hole in the frame, right down to bare metal. Smear the cleaned area with some silicone dielectric grease, do the same with the lug end with the bolt hole. Reconnect both ends of the negative cable and try starting again.

//greg//

Farmpro 2420 starter will not engage
Jinma Farmpro Agracat Nortrac
Replies 3 Post by greg_g

thanks for that tip> I will try the flush first thing. IT's just a bit strange...when you turn the steering wheel all the way to the right or left it doesn't come to a stop like it used to. I have heavier hydro oil in it then called for and at the end of summer I plan to change that anyway. Here in TN is gets really hot and humid.

Nortrac 204C Tractor hydraulic and pto problem
Jinma Farmpro Agracat Nortrac
Replies 21 Post by jayshu

After setting up all winter, when I start my tractor it idles uncontrollably high, to the point I have to shut fuel off for fear of blowing motor. I assume the governor/throttle link is stuck wide open inside the pump. Any help, tips or suggestions would be greatly appreciated.

JD 850 injection pump issue
John Deere Tractors
Replies 1 Post by missco13

[QUOTE=greyhorse;192630] Just noticed that the big box stores are now selling ethanol free 92 octane premix in quarts for $6.00 or $20.00 for just under a gallon (110 vs 128)....[/QUOTE]<br>
<br>
That is some markup for taking out 10% ethanol.<br>
<br>
Have to be nuts to spend that on fuel all season. That said I might be tempted if I remember at season end to store like you said. Doubt I will actually do it though. <br>
<br>
I second run dry end of season.<br>
<br>
Wish that had no mix version ethanol free version one for the generator too.

2-Cycle Pre-Mix Fuel now sold at Lowes Home Depot
Shop Tools
Replies 2 Post by ford2000

Thanks for Your Help shipert! I forgot 5 years ago I changed the generator to a GM Alternator that has it own regulator built in. It worked good except the charge lite was reverse. Maybe my alternator has gone bad!

Long 460 Reg dash light G
Long
Replies 3 Post by gldparadise