Tractorpoint Search for

tractorpoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors, Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images

parts | discussion | photos | podcast | reviews | specs | dealers | classifieds | contact | faq | myProfile | home Login Now | Sign Up

Search for =

Topic

[QUOTE=auerbach;192025] Whoever wrote those tips forgot to instruct to deflate all the tires -- to release the pressure. [/QUOTE]

Sure, maybe decrease by 15psi really unless it's your snowplow tractor too. Then add the chains and the oil warmer or the lower radiator heater.

Winterize
Yanmar Tractors
Replies 5 Post by bmaverick

Thanks for the info Joel.I got on off ebay that is new and very close to what I need.I just need two 90 degree angle fittings to get it to fit without any mods.
JAC

Kubota B6000 locate Spool Valve
Kubota Tractors
Replies 6 Post by jacspecialty

It warmed up today a little so I hooked the splitter up. The book showed the pressure and return hook-ups backwards, other than switching those it works great. I split some with ease that my gas engine splitter wouldn't touch. Really happy with this!

Speeco 3pt log splitter
Operating and Attachments
Replies 7 Post by yocsr1

[QUOTE=Rguarino;191867] Dan, I have a B8200 4WD (with a shifter) with the same problem. [/QUOTE]

Thanks Rob. A couple of things.

1) I am glad to know I'm not alone with this problem. -Although I'm sorry for your trouble.

2) I REALLY wish I had read the above before I found what was, I'm pretty sure, the last new old stock loader valve in the country, had it sent to me from Wisconsin and installed, and realized the problem was not resolved... AHHHHHHHH!

3) I am actively still looking for a solution to this, so any and all opinions are still encouraged and appreciated. -I have printed out all relevant opinions and will drop them off at the shop to try.

4) Once I figure out what the issue is, I WILL share it so you and others can learn from it.

5) Just spit balling, I'm wondering about the idea of emptying the hydraulic system of oil and pressurizing it with air and listening for air leaks, any thoughts on this strategy?

Some times I think about giving up and finding someone down south to sell it to...

Anyway, thanks again for the help all.

Dan

Kubota B8200 after Hose and Fluid change no Hydraulics
Kubota Tractors
Replies 46 Post by dfiletti

Very good review and comparisons of deere vs kubota. too bad it is 10 yrs old. What should be added to the review is the problem with cracked bellhousings on the JD 110 TLBs. I went to look at one yesterday and knew where to look and found a crack. Have no idea why they crack but the repair cost is 5 figures! Buyer beware.

Deere 110 verses Kubota L48
John Deere Tractors
Replies 12 Post by hughow

Gary,

Welcome to our little corner of the internet. I certainly wasn't trying to discourage anyone at all, but people tend to get discouraged when they don't get a reply to a question not realizing they're in a thread that's years old.

Best of luck.

Inland Snowblower
Snowblowers / Snow Plows
Replies 10 Post by Murf

I can supply you with a head gasket & standard bearings. I'd have to check on other sizes. I can be reached at parts at sheaftractor.net

C174 head gasket
Hinomoto
Replies 9 Post by lsheaffer

Looking for front grill and air filter canister for my 990 David brown. If you have one please let me know at 19037300590

990 case David brown
Antique Tractors
Replies 1 Post by bmonas

Chinese ignition switches are notoriously unreliable. OE switches are not weatherproof, and the wafers inside simply disintegrate over time. But there are a couple other things to check first. <br>
(a) battery ground cable: disconnect the end that's bolted to the engine support frame. Use a wire brush or acetone to remove the paint from both the cable lug and the support frame. Once you've got bare metal on both, reattach the battery cable<br>
(b) clutch interlock switch; it's underneath the left floorboard. Yours may be positioned incorrectly relative to the clutch pedal, or it may be damaged/destroyed already. Reposition/replace as necessary<br>
<br>
Even if one of the above is the current cause, I recommend replacing the OE switch anyway. It WILL eventually fail. Shop for a Ford type cold start switch. There are cheap replacements for under $20 ( http://www.dealsinapinch.com/A_E7NN11N501AB_p/a-e7nn11n501ab.htm ). Chinese, but still better than OE. If possible, find a Lucas switch, they're the most reliable.<br>
<br>
And if cost is no object, get the same switch in marine grade. They're weatherproof and nearly indestructible. This one<br>
http://www.ebay.com/itm/LUCAS-TYPE-UNIVERSAL-COMMERCIAL-MARINE-DIESEL-TRACTOR-IGNITION-SWITCH-IGN1-/291280826453?pt=UK_CarsParts_Vehicles_CommercialVehicleParts_SM&hash=item43d1b0b055<br>
is only an example, but I'm not sure if it can live up to the waterproof claim.<br>
<br>
<br>
//greg//

Fuel Line Replacement
Jinma Farmpro Agracat Nortrac
Replies 4 Post by greg_g

Glad to be of service :)

Are you talking about the big lump that is on the end of the crank and which the belt goes around? if so, strip it down. Its pretty easy WHEN you have got it off the engine. There is a 13mm headed bolt you need to remove, thats easy BUT then you need a long shaft and i think its a 12mm threaded bolt which pushes agaisnt the crank to pop off the clutch unit. Its a pig! Personally, i would take the engine out and do it on the bench. Removing the engine is half an hour, just remove exhaust, attachcments to starter and carb then remove stabaliser bar to rear diff and four securing bolts underneath. Once on the bench you can easily remove the long 13mm headed bolt and see with a torch the larger threaded bit that you need to tackle. Actually, thinking about it, if you take the engine out, you could leave the clucth on the crank and just remove the end of it to see what it wrong, its four small headed bolts.

Fuel in Crankcase Need Help
Utility Vehicles UTV/ATV
Replies 5 Post by lostjohn

[QUOTE=dtk1952;191994] I notice that you are new to the forum. If you had been around for awhile you would know that Murf is an up front person and writes sensibly. [/QUOTE]<br>
<br>
Did not mean to ruffle any feathers. As this is a tractor forum with mostly big pieces of equipment I think this case is a little different.<br>
<br>
Retol is probably just a residential guy doing his own lawn I am guessing. If he is a lawn service he is just a jerk that should just trailer back and not waste our time.<br>
<br>
But if not he went the extra mile to not go to Lowes or Home Deport to buy junk, went the premium route on dollars. And if so it is just outrageous to me that the dealer will not be immediately responsive with a delivery flaw that the machine is DOA. This is much less about Kubota and more about the dealer he bought from.<br>
<br>
And Murf yes Retol has been so quiet maybe it was his bad afterall ....:(

Kubota Tractor Customer Service Issues
Kubota Tractors
Replies 14 Post by xperts

I have a late 90s 4x2 gator and when I have the differential locked in the rear end sometimes makes a loud clicking sound. Adjusting the cable helps for a little while but then it will start clicking again. is my cable worn out or is it something in the rear end that needs replaced?

John Deere Gator 4x2 rear end clicks
Utility Vehicles UTV/ATV
Replies 7 Post by gatorbob9568

Best trick I learned ( trying to fix a mystery valve) was to blow air in the out end to figure out where the hydraulic channels actually went. Once that was done ( and all the diagrams were proven wrong ) everything became easy.

Hydraulic Stuff lessons learned
Parts and Repair
Replies 2 Post by cheapscot

Just thinking off the top.
Check the rotation of the rotor.
You may have the wires in backwards order.
I did that once on a motorcycle.
Try running an extra ground wire from battery ground to the head and to the body of the distributor.
Check the ground on the coil. Check for the coil arcing out.
I had a coil arcing and could not see it flash when I tried it in the dark.

MF 150 Z134 Gas Engine Running on 1 cylinder
Massey Ferguson Tractors
Replies 7 Post by arcwelder

Well I'm running out of room in the barn! I'm going to have to quit buying stuff or add on.

Got New 3PH Tiller or Toy Today
Operating and Attachments
Replies 17 Post by yocsr1

Vince- You may have found this out already, but the Cummins Fleetguard hydrostatic filters fit the DK Series. I found out when I started cross referencing with some Australian equivalents of a Polish filter used on Kiotis sold in Poland. It looks like the all the different filters are made in China and FOB out of Shanghai at $12.30 a pop. I don't feel guilty buying from Cummins at half the price of Daedong as there is still a heck of a lot of profit in it for the seller.

Kioti LB1914 shifting problem
Kioti Tractors
Replies 11 Post by cheapscot

I'm not familiar with farmpro, but my foton had a relay under the dash that stuck open. I popped the cover off and could activate it buy hand until the new one came in.

Ignition switch
Jinma Farmpro Agracat Nortrac
Replies 3 Post by yocsr1

I have had same problem in the past. With the brakes set and the tractor in neutral the tractor will start without the seat safety switch working, but will die if not in the seat. The problem is in the seat safety switch.
Tilt your seat forward and check the push button switch on the seat base. The metal tab on the bottom of my seat broke and I had to weld a new one on. An easy check of the switch is to unplug the switch and use a jumper wire on the wires. Always seem to happen when the weather gets cold.

New Holland TC 35 shuts down
New Holland Tractors
Replies 2 Post by rlm304

If you did not change the settings of gears 4 and 6, then you do not have to change the pump timing when replacing the pump.

Belarus won t start
Belarus
Replies 4 Post by cowrider

Have no idea if that labor cost is right or not. How it could happen with 500 hours, I would say it was by not engaging the 4 wheel drive per the manual, or maybe using 4 wheel drive on solid surface such as a highway or parking lot. sorry about the problem.

4310 Front Wheel Drive not working
John Deere Tractors
Replies 2 Post by kthompson