Go Bottom

Part Needed

View my Photos
DawnsFarm
Join Date: Oct 2015
Posts: 6 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2015-10-14          193872


Hello and thank you for allowing me to join your group. I am looking for some help locating a power steering part for a Massey Ferguson 1235 series. O.E.M. number is 3607333M91 , this is a steel line from the Iseki pump to the gear box. To describe it is as follows, Pump end round with 4 bolt holes, tube then snakes under pump assemble down the frame, bending again to the front, and to a flare nut fitting at the gear box. I have contacted dealers and it is no longer available. I have contacted several companies by phone and on line in hoping to fine one. We could attempt to refit with hydraulic hose but we have had to repair the top of the line already. Thank you in advance for any help possible.



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Part Needed

View my Photos
DawnsFarm
Join Date: Oct 2015
Posts: 6 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2015-10-14          193873


....

Picture Link


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Part Needed

View my Photos
DawnsFarm
Join Date: Oct 2015
Posts: 6 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2015-10-14          193874


Power steering line, Massey Ferguson 1235 ....

Picture Link


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Part Needed

View my Photos
lsheaffer
Join Date: Jun 1999
Posts: 1082 Northern Illinois
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2015-10-15          193875


If it is an obsolete part, best bet is to replace with hose or if it is cracked braze it. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Part Needed

View my Photos
DawnsFarm
Join Date: Oct 2015
Posts: 6 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2015-10-15          193877


Isheaffer, thank you for the comment , we have had to braze it a few times now. we are looking into r/r with rubber now but prefer,due to location/routing to go with steal. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login