Go Bottom

John Deere Gator HPX Ignition Module replacement

View my Photos
jbrit1940
Join Date: Apr 2014
Posts: 5 Franklin, Ga
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2014-05-02          190240


Is there a test for module? Is there a special proceedure to remove and replace module. My maint. book does'nt give much on this item, hate to spin that much and it not be the problem.




Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



John Deere Gator HPX Ignition Module replacement

View my Photos
jbrit1940
Join Date: Apr 2014
Posts: 5 Franklin, Ga
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2014-05-02          190243


Replaced Ignition Module and it did not correct problem.What else could be causing the starter problem? See first post under gator will not start for more info. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



John Deere Gator HPX Ignition Module replacement

View my Photos
gatoraider
Join Date: Nov 2008
Posts: 544 Maryland
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2014-05-03          190247


No test that I know of, but they go out with many different symptoms, yours being one of them. Removal is unplug, remove two bolts. Replacement is the reverse. Actually you don't even have to bolt a new one up to see if it will work, just plug it in and it should run just hanging there. I know it's a lot of money to spin, bad thing is, the dealer won't let you un-spin it after you spin it.( no returns )..................... ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



John Deere Gator HPX Ignition Module replacement

View my Photos
gatoraider
Join Date: Nov 2008
Posts: 544 Maryland
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2014-05-03          190248


There is a regulator on the right frame rail with a 6 or 8 prong plug that will get dirty sometimes, unplug that and clean it real good. I assume you cleaned ALL battery terminals with a wire brush, the ground on top of the motor could be a problem. Save that module, if you have the HPX any length of time, you'll need it.............. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login