Go Bottom

Carbon buildup on Spark Plug causes stalling

View my Photos
jkeyse
Join Date: Aug 2011
Posts: 5 Maryville, TN
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2011-08-04          179673


After cleaning the spark plug the gator runs fine for several days, but if the engine idles for any length of time the plug gets a coating of carbon and causes the engine to miss, cough, and eventually die. The engine will usually not start again until the plug is cleaned. I removed the spark arrestor on the tail pipe which was causing a back pressure, and this same problem, but that was about 4 years ago. It had been running well until this year. I have tried a hotter plug, inspecting the air filter, and removed cleaned the muffler.



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Carbon buildup on Spark Plug causes stalling

View my Photos
strikefalcon
Join Date: Aug 2011
Posts: 6 minnesota
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2011-08-22          179974


When it is missing etc. Will it clear itself or does it always die? ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Carbon buildup on Spark Plug causes stalling

View my Photos
jkeyse
Join Date: Aug 2011
Posts: 5 Maryville, TN
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2011-08-22          179975


The spark plug never clears itself. It doesn't always die, not until the plug no longer can fire to ignite the charge. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Carbon buildup on Spark Plug causes stalling

View my Photos
strikefalcon
Join Date: Aug 2011
Posts: 6 minnesota
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2011-08-24          180027


Sorry the only thing I gan think of might be ring blow by but if it is not burning oil I don't know.

Don't let it idle.

Loren ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Carbon buildup on Spark Plug causes stalling

View my Photos
jkeyse
Join Date: Aug 2011
Posts: 5 Maryville, TN
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2011-08-24          180035


The engine is not burning any oil. Do you know what the cylinder compression stroke pressure should be on the Kawasaki single cylinder engine. My gauge reads about 35 psi which seems extremely low. In some Kawasaki lit it said the engine had a compression release system, but it was referring to a rope pull start. Of course the gator has a 12 volt starter motor, so doesn't seem like the engine would need a compression release to start, but who knows? ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Carbon buildup on Spark Plug causes stalling

View my Photos
gatoraider
Join Date: Nov 2008
Posts: 544 Maryland
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2011-08-25          180038


35 PSI is low. There is a spring loaded compression release on the inside of the camshaft. There is a tab that hits the lifter at slow rotation until rpms get up and overcome the spring pressure. If the spring was broken I don't think the release would work at all and I have never seen one bound up to hold it on all the time, but I guess It's possible. Could be a valve train problem. Valves are set at .005 cold ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Carbon buildup on Spark Plug causes stalling

View my Photos
jkeyse
Join Date: Aug 2011
Posts: 5 Maryville, TN
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2011-08-28          180090




www.emerichsales.com - New & Used Equipment
View Tractors For Sale!






Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > John Deere Gator Forum

Page [ 1 ] |
Reply | Pop Up Window Reply
08-04-2011, 21:00 Post: 179673
jkeyse



Join Date: Aug 2011
Location: Maryville, TN
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 4

3 Filter by User
Carbon buildup on Spark Plug causes stalling

After cleaning the spark plug the gator runs fine for several days, but if the engine idles for any length of time the plug gets a coating of carbon and causes the engine to miss, cough, and eventually die. The engine will usually not start again until the plug is cleaned. I removed the spark arrestor on the tail pipe which was causing a back pressure, and this same problem, but that was about 4 years ago. It had been running well until this year. I have tried a hotter plug, inspecting the air filter, and removed cleaned the muffler.




Reply to PostReply | Quote Post Reply to PostQuote Reply



Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

08-22-2011, 22:55 Post: 179974
strikefalcon



Join Date: Aug 2011
Location: minnesota
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 6

2 Filter by User
re: Carbon buildup on Spark Plug causes stalling

When it is missing etc. Will it clear itself or does it always die?

Reply to PostReply | Quote Post Reply to PostQuote Reply



Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

08-22-2011, 23:11 Post: 179975
jkeyse



Join Date: Aug 2011
Location: Maryville, TN
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 4

3 Filter by User
re: Carbon buildup on Spark Plug causes stalling

The spark plug never clears itself. It doesn't always die, not until the plug no longer can fire to ignite the charge.

Reply to PostReply | Quote Post Reply to PostQuote Reply



Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

08-24-2011, 13:31 Post: 180027
strikefalcon



Join Date: Aug 2011
Location: minnesota
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 6

2 Filter by User
re: Carbon buildup on Spark Plug causes stalling

Sorry the only thing I gan think of might be ring blow by but if it is not burning oil I don't know.

Don't let it idle.

Loren

Reply to PostReply | Quote Post Reply to PostQuote Reply



Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

08-24-2011, 23:35 Post: 180035
jkeyse



Join Date: Aug 2011
Location: Maryville, TN
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 4

3 Filter by User
re: Carbon buildup on Spark Plug causes stalling

The engine is not burning any oil. Do you know what the cylinder compression stroke pressure should be on the Kawasaki single cylinder engine. My gauge reads about 35 psi which seems extremely low. In some Kawasaki lit it said the engine had a compression release system, but it was referring to a rope pull start. Of course the gator has a 12 volt starter motor, so doesn't seem like the engine would need a compression release to start, but who knows?

Reply to PostReply | Quote Post Reply to PostQuote Reply



Bookmarks: Digg It | Del.icio.us | Technorati | Furl | Stumble This

08-25-2011, 05:30 Post: 180038

gatoraider

I really appreciate your input about the compression release system. If the compression release is slow to close, such as at idle speed, it would explain the poor combustion in the cylinder. It would also explain why there is no loss of power at higher rpm's.
....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login