Go Bottom
____________________________________________________________________________________
Ford 1910 Hydraulic oil in engine

hillside Join Date: Jan 2011 Posts: 2 Woodbridge,Ct.

2011-01-10          176337

I believe that the shaft seal on my hydraulic pump let go and that is why I'm over filling the crank case and the oil is coming out of the breather tube. I'm not quite sure if the pump un bolts from the front cover on the outside or if I have to remove the cover first. Also what is the best way to drain the whole hydraulic system. I pulled the drain plug out and draied the system that way but I still have a remained or contaminated oil in it(water). I drained the loader system wit removing the line and cylinders also. But the fluid is still milky!

Reply to | Quote Reply | Add Photo


____________________________________________________________________________________
Ford 1910 Hydraulic oil in engine

bohawg Join Date: Oct 2009 Posts: 20 west virginia

2014-08-19          190966

Quote: Originally Posted by hillside | view 176337

[QUOTE=hillside;176337] I believe that the shaft seal on my hydraulic pump let go and that is why I'm over filling the crank case and the oil is coming out of the breather tu ... [/QUO



Did u ever find why the seal went out ....

Reply to | Quote Reply | Add Photo



Return to index    Go Top


Share This