Go Bottomtc40da pto starts hard
 | wannabfarmer
Join Date: May 2010 Posts: 3 iowa 
|
2010-05-30 171202
My dad and i just got a used 2004 TC40DA a day ago and we hooked up the 3 point finish mower to try it out and engaged the pto and it just took off, like it didnt have a soft start or anything, i was just wondering if this is normal or what? Any help would be great thanks!
Reply to |
Quote Reply |
Add Phototc40da pto starts hard
 | earthwrks
Join Date: Dec 2003 Posts: 3853 Home Office in Flat Rock, Michigan 
 Pics
|
2010-05-30 171218
Does it use a manual clutch versus an electric type? My 33D is a hydro with a single stage manual clutch; if it were a gear trans it would have a two stage clutch. Are you letting out the clutch too fast? ....
Reply to |
Quote Reply |
Add Phototc40da pto starts hard
| earthwrks
Join Date: Dec 2003 Posts: 3853 Home Office in Flat Rock, Michigan
Pics
|
2010-05-30 171228
Does it use a manual clutch versus an electric type? My 33D is a hydro with a single stage manual clutch; if it were a gear trans it would have a two stage clutch. Are you letting out the clutch too fast? ....
Reply to |
Quote Reply |
Add Phototc40da pto starts hard
| wannabfarmer
Join Date: May 2010 Posts: 3 iowa
|
2010-05-30 171231
nope no cluch, its a hydrostat, just the lever on the left side... i know of the two stage cluch you are talking about, his previous 1310 ford (gear drive) had it, you push the cluch in and the tractor would stop push it all the way and the pto would stop. ....
Reply to |
Quote Reply |
Add Phototc40da pto starts hard
| earthwrks
Join Date: Dec 2003 Posts: 3853 Home Office in Flat Rock, Michigan
Pics
|
2010-05-31 171242
Like I said a hydro can and does have a clutch. I've never seen a NH with an electric PTO. And my lever's on the left to. But if it does have an electric PTO it only makes sense that you cannot feather the PTO--it's either on or off. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This