
Kubota B7100 Alt gen bearings replacement
![]() | randywatson
Join Date: Apr 2007 Posts: 109 texas ![]() |
2007-09-06 145426
Was working with FEL and all of a sudden heard a squalling belt, shut it down and found slipping around gen/alt pully, tightened slightly, still slipped, loosened belt, and gen pully would not turn by hand, pulled fan and gen assembly, yes it is possible to get the nuts off without taking the head off, found the rubber grommet where the wire enters the gen had disappeared, dirt dobber or dust sucked into gen through the hole gummed up and froze the two bearings, got em ordered,and sealed the hole with rubber sealant, putting her back together tonight.
Reply to |


Kubota B7100 Alt gen bearings replacement
![]() | earthwrks
Join Date: Dec 2003 Posts: 3853 Home Office in Flat Rock, Michigan ![]() ![]() |
2007-09-06 145450
uh-huh, and? ....
Reply to |


Kubota B7100 Alt gen bearings replacement
![]() | randywatson
Join Date: Apr 2007 Posts: 109 texas ![]() |
2007-09-07 145479
Earthworks,
back together working fine, sorry if I bored you...:)
I guess the moral of the story was even a small rubber grommet dry rotting can cause problems... ....
Reply to |




Share This