TC45 problem
provobis
Join Date: Jun 2005 Posts: 8 Ohio |
2005-06-12 112279
edit
I'm still a tractor greenhorn. Got a brand new TC45 to do work, gardening, trenching, etc on the property. It has a front loader bucket and backhoe attached. Just got delivery yesterday and tried it for the first time to move a small amount of dirt with the front loader. Immediately noticed a terrible shuddering, shaking and jerking when in forward or reverse, low or high speed, particularly going over a SMALL bump or SMALL grade. The transmission(?)just does not want to move the tractor and I have to push harder to move at all. Afraid to use it that way, might cause damage! No other problems with hydraulics, etc. Have to call the dealer next week but in the meantime would like to know if anyone can think of something I missed. (The foot brakes are off of course). Followed all use procedures that I know of.
Thanks all, Roger
Reply to | Quote Reply | Add Photo
TC45 problem
earthwrks
Join Date: Dec 2003 Posts: 3853 Home Office in Flat Rock, Michigan Pics |
2005-06-12 112282
You didn't say if it's gear-drive or HST. My guess if it's HST it could be nearly empty of hydraulic fluid. If that is the case, the pump is starving for fluid which makes it worse when hitting a bump (if the loader is up that will use up fluid volume too). You'll wipe out the drive pump in no time (ask me how I know), and possibly damage the HST motor too. If it's gear---I dunno---might be a bad ring-and-pinion set up. If it's 4x4 be sure the selector lever is in the correct position---might be between modes. ....
Reply to | Quote Reply | Add Photo
TC45 problem
provobis
Join Date: Jun 2005 Posts: 8 Ohio |
2005-06-13 112291
Thanks for the comeback earthwrks. I am not (yet) a premium member so I could not read your entire message. But I did see your suggestion that the hydraulic fluid might be low, and that's the first thing I thought of when the tractor would not move (rear wheels in a shallow rut). The TC45 DOES have HST so I checked all fluids in case the dealer did not prep the tractor right. Fluids were all topped off. I rechecked all my manual procedures and operational settings and could not find anything I missed. Hate to think the dealer could have given me a defective unit. How often does that happen? If so, it WILL happen to me! ....
Reply to | Quote Reply | Add Photo
Go Top
Share This