Tractorpoint Login

print < Tractorpoint Login

Tractorpoint

Forums
- Search
- Forums
- New Posts
- Photos
- Manuals/Links
Parts
Support
Account

Search for = wwiiavfan

Topic

[QUOTE=Murf;166097] First off, I'm sure there is a PB (power beyond) kit available for your machine, but I'm sure you won't want to run out and get it. I can't recall ever seeing one that was less than $500 and that doesn't include the required valve, lines or connectors.IMHO you'd be better off either plumbing a second valve into the existing FEL plumbing, or using a 'T' and fitting to tap into the existing plumbing and just use one of the existing circuits like the bucket curl function. Just remember you'll need to either block the bucket in place or use a ball valve to block the flow in the existing circuit.Also, IIRC the JD uses an 'open center' type of valve, anything you add has to be compatible or you'll dead-head the pressure circuit.It may just be less grief all-round to just get a cheap 12v. winch designed for an ATV from one of those discount places and use a few wraps of cable in a circle to spin the discharge chute. If it has a 3-way switch (power in & out) it will solve the whole issue.Best of luck. [/QUOTE]

Good advice on the winch for turning the chute. It worked pretty slick, and only cost $90. Now I just wait for the snow to try it out!

Thanks.

Front mounted cub snow thrower on JD
Snowblowers / Snow Plows
Replies 9 Post by wwiiavfan