Tractorpoint Login

print < Tractorpoint Login

Tractorpoint

Forums
- Search
- Forums
- New Posts
- Photos
- Manuals/Links
Parts
Support
Account

Search for =

Topic

I have a brand new Farmtrac 60 with 5320 loader, boxblade and 6ft bushhog. The tractor is great. Nice powerful 50 hp 2wd old style tractor. Drive train is interchangeable with Ford 3610. Tractor is made in India by the same folks who built the Ford models.

I've put about 10 hours on the tractor doing boxblade, loader and disc work.

Even with unloaded tires and only a box blade for rear weight I'm able to fill the loader bucket with sandy loam/clay.

The placement of the differential lock pedal is perfect. Works very well in pulling through slick conditions. I also really enjoy shifting the weight back to the rears with the loader when I put the fronts in a ditch.

Used the boxblade on my dads 1/2 mile drive. Worked well. Pulled well in 3 low.

Used the tractor with a old 5 ft bush and bog disk with about 18" disks on old roadbed where I had previously removed small trees and brush. No problem in 1 low pulling the disks through the new ground.

After repeated passes was able to cut and smooth roughed out driveway bed with loader.

Only dislike is the gears are stiff. They are loosening with use (would appreciate any break in tips). I did bang my knuckles a few times.

Worked the tractor over two days for over 7 hours. Used about a gallon of diesel per hour.

Tractor is not a modern design or 4WD but suits my needs.

Jim

Long FarmTrac 60 Information
Long
Replies 5 Post by f350driver