Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I own a 2007 Skidoo GSX 600 HO SDI and have only run the Skidoo synthetic blend in it. It is oil injected fuel injected and it has just over 4000 miles on it. I was at the dealer the other dayand overheard him talking to another customer about oil. The customer was looking for the cheapest oil to put in his sled and the dealer told him that the skidoo blend wasnt the cheapest but in his opinuion was best. when a sled comes in and needs torn down the inside of the engine was cleanest when using skidoo blend. That being said I would run the skidoo blend.
Oh yeah, yes sleds have come along way since the 70's or 80's for that matter. I put 2100 trouble free miles on my sled last year and only had to change the wear bars on the skis and got about 18 to 20 mpg doing it!! :)

Snowmobile Oil and Maintenance
Everything and Anything
Replies 8 Post by 600rider

I allready have a single spool valve and just hooked it up by splitting the hydraulic line for the front valve and running it to the remote and back to the loader valve works great. it was an open center valve. thanks for the info btw where did you get a toplink for $30 the only ones I've seen were on ebay for $150 to $250? thanks Ken.

Kubota B7510 rear hydraulic valve
Kubota Tractors
Replies 6 Post by 600rider

I have a loader valve on my Kubota b7510, I built a cab for it and had to cut the handle down so it didn't hit the window or pinch my finger, it works like a charm. I guess if you are a little on the short side at 5'8" I must be a midget at 5'4" but I do not have a problem with the seat on my tractor no BH or FEL but can reach everything just fine. I wish I could afford the arm rests for it though.(dealer quoted me $85....EACH!!!! ouch) Ken.

Kubota BX seat
Kubota Tractors
Replies 12 Post by 600rider