Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I purchased a L3430 with a 723 loader and 66" quick attach heavy duty bucket. The smaller bucket was purchased because of narrow clearance in wooded areas and the recommendation of a dealer that suggested it was less likely to overbalance the tractor when filled. I really enjoy the lifting capability of the loader, especially when using my hydraulic grapple. Choosing a smaller bucket with the 723 loader could be a compromise for you in hilly areas. It has worked really well for me.

Greg

FEL size 3130
Kubota Tractors
Replies 11 Post by GSV40U

Alright I finally talked my dad into going with the 790 with 419 loader instead of the farm pro. We wont be buying for another month or 2 so is there and problems with the 790 w/ the 419 loader i should know about ? <br>
<br>
We also have an older 5' HOWSE brush hog will the 790 pull it?

790 troubles im starting to worry
John Deere Tractors
Replies 6 Post by jd60kid

Many Kioti engines cross to the Napa 1182 oil filter.
The Napa 1324 is the same on the sealing end, but just a bit shorter in length giving me more room between the filter and body panals.

DK 45 Oil filter
Kioti Tractors
Replies 4 Post by DK35vince

look hard at the b7800 it's 30 hp and not much more or the 2710/2910 at 27 and 30 hp with more features like my favorite the TELESCOPIC LOWER-LINK END makes it much easyer to hook up equipment. these tractors also have three ranges instead of two.

What is the best HP for Finsh Mower Widths
Mowers Field and Finish
Replies 15 Post by TNCHRIS

Does anyone know what the handle is for on the right side of the transmisson by your leg that looks like a little 4 speed shifter? Also ,does anyone have info on where I can get an owners manual or books for the thing?<br>
<br>
Thanks

E1804 Hinomoto
Hinomoto
Replies 2 Post by gogo647

I am also looking for a service and parts manuals for a Shibaura SD5040T. I was wondering if you were successfull with your search. If so is it possible to contact me regarding price/availability.

regards,
Peter Undery

SD5040T model
Shibaura
Replies 5 Post by romaine

Thanks again for the info. Enjoy your Kubota. I am using mine for raking and tedding hay and stacking the big bales onto the wagon for the trip to the barn. What a joy to drive and operate. Can't keep my brothers off of it.

L3830HST 50 hour service hillbilly style
Kubota Tractors
Replies 4 Post by Grey Hog 79

Marshall is about 30 miles straight north of Sedalia.

JOHN DEERE 790 vs farm pro 2430 HELP PLEASE
John Deere Tractors
Replies 14 Post by hared1112

Is there anyone working feilds (plowing and disking)with a hydro trans. was wondering how it does. read some old post stating it is sort of a strain on them. Was going to be trading my 790 in on a 5105 for more power for workin my plots and to dabble with some hay work, but after getting some real life figures, WELL...... lets say I'm going to be steppin back into the 4000 series.Found a fair deal on a 100 hour used 4710 with ehydro and 460 loader, was told it should handle bales if ballast was right and I wasn't trying to set any speed records, but was concerned about how the trans would hold up to my feild work. It also has R4;s (probley not the best tire for field work) but figure I can get some R1's soon.

working feilds with hydro trans
John Deere Tractors
Replies 10 Post by plots1

I took some pictures of Crossed Blades on my 72" MMM Just to show you what they looked like...by the way the B-2910 tractor is on car ramps as I am taking these<br>
<br>
http://img78.photobucket.com/albums/v248/GARYTUCKER/DSC00315.jpg<br>
<br>
http://img78.photobucket.com/albums/v248/GARYTUCKER/DSC00314.jpg<br>
<br>
http://img78.photobucket.com/albums/v248/GARYTUCKER/DSC00313.jpg<br>
<br>
http://img78.photobucket.com/albums/v248/GARYTUCKER/DSC00307.jpg<br>
<br>
http://img78.photobucket.com/albums/v248/GARYTUCKER/DSC00301.jpg<br>
<br>
http://img78.photobucket.com/albums/v248/GARYTUCKER/DSC00312.jpg<br>
<br>
http://img78.photobucket.com/albums/v248/GARYTUCKER/DSC00311.jpg<br>
<br>
http://img78.photobucket.com/albums/v248/GARYTUCKER/DSC00308.jpg<br>
<br>
Even though I am having an extreme drought now....and I have stopped cutting because If I cut the grass will burn up due to dryness....I just had to see how the new Tractor cut!<br>
So I cut a few strips to see<br>
http://img78.photobucket.com/albums/v248/GARYTUCKER/DSC00325.jpg<br>
<br>
http://img78.photobucket.com/albums/v248/GARYTUCKER/DSC00326.jpg<br>
<br>
http://img78.photobucket.com/albums/v248/GARYTUCKER/DSC00320.jpg<br>
<br>
http://img78.photobucket.com/albums/v248/GARYTUCKER/DSC00321.jpg<br>
<br>
http://img78.photobucket.com/albums/v248/GARYTUCKER/DSC00330.jpg<br>
<br>
Grass is cut in transport mode here....about 8 and 1/2 inches high....and the uncut grass is in places at least twice that high.....with one pass and no clippings visible.<br>

Pictures of stacked blades on MMM
Kubota Tractors
Replies 8 Post by FERRARI

new, very proud owners (dad and I) got our first new tractor!<br>
te33da, paid 18290 out the door delivered with loader. Did I get a good deal?<br>
have to wait at leat a week for tractor to come in from georgia.<br>
What in the hell does Boomer mean, the cruved front end loader?<br>
Dealer said bugs worked out after 7 years. What should I expect and get ready for?<br>
thanks and happy to join the new holland famliy.<br>
jeff

bought a 33 boomer today
New Holland Tractors
Replies 31 Post by wolftownjeff

Do you have a Rhino dealer nearby ?<br>
I paid less than that for a 8 1/2' Rhino backhoe with subframe.<br>
A Rhino 65a would be comparable to the 6500.<br>
I just recently dug over 540', 40" deep utility line ditch with my Rhino 85 and I'm very impressed with its power and performance.

woods 6500 back hoe
Loaders Back Hoes
Replies 6 Post by DK35vince

Not sure what your friend is going to do with this, but maybe just wants the best and some arrghh value. Nothing wrong with that!

From my experience with the Home Desparate supposed commercial grade Excel unit with the Honda 6HP that cost $699, this unit is rated at 2700 psi and I would have to say that even at that psi I can destroy more surfaces than I care to admit!

I think every newbie like me to pressure washers probably has the misfortune to spray too close to something like soft cedar or even etch concrete once or twice, before you realize that you need to back off a bit on the proximity.

All of this makes me wonder if a 2700 psi unit does that what does a 4000 psi unit do. Another consideration that is applicable to me is that higher pressure washers with larger hoses put out more water. My house well only puts out 7gpm which is just Ok with the 2700 psi washer I have.

If you are going to run the washer on a customers system you may get burnt if the water supply cannot produce the right gpm your 4000 psi unit requires. I am not looking at the specs as I say this so it is something that would have to be confirmed when shopping.

Dennis

Selecting a pressure washer
Just For Fun Off Topic
Replies 8 Post by DennisCTB

Thanks Kwshumm,

That would be a huge help. I can't wait to start using it. Do you know what approximate length your lines are?

Bodozer Grapple Questions
John Deere Tractors
Replies 10 Post by cj2002b

My 4310 was delivered Thursday P.M. Beautiful Machine!!Will now be spending the next several weeks familiarizing myself with all the controls and reading all the manuals.Here are the specs: 4310 ehydro, MFWD, turfs, 430 FEL w/ HD quicktatch bucket and replaceable cutting edge, 48 BH w/ 18" bucket, MX5 cutter, 59' front mount snowblower, quicktatch ATI forks, weight box, imatch hitch,55 amp alternator, extra lights front and rear, and switched backup alarm. Now it's time to play, err, I mean go to work!!!!!!

New 4310 is here
John Deere Tractors
Replies 34 Post by Mikef54

Further point: I really appreciated the points made by Ken and the full discussion of tiltmeters in the safety forum. It may have helped me avoid injury or worse. Thanks.

slope indicator for Kubota
Kubota Tractors
Replies 38 Post by jjfinn

I have been reading about how to determine the year model of my newly acquired tractor. My SN is MDO870B001805.<br>
It was sold from a dealership in Maynardville, Tennessee.<br>
<br>
I would like to know who it was sold to, so that I can re-construct its past life.<br>
<br>
The tractor is absolutely showroom new. It shows 245 hours of use, and I believe it. It runs perfect. So far, I have changed oil and filter. Also Air filter, which was very new looking. Any help appreciated.

John Deere Model 870 Compact tractor
John Deere Tractors
Replies 1 Post by Bob1937A

what freaks me is that i see retired astronauts claiming while on the darkside of the moon they saw things. i mean the "right stuff" guys actually saying this!! they also say that they were
told by nasa to say nothing?

o' course on cold dark nights as we look up there sure are a lot of possible parking lots up there.

crop circles
Just For Fun Off Topic
Replies 4 Post by JLHall

thanks for the reply, i hope your son is successful with his delima.

yes i know married folks get their plate cleaned too, i been there abd done that on a small scale compared to this fiasco too. one of my few friends left told me his mother after 45 years of marriage now has a 30 year old boyfriend and is cleaning hus dads plate. 45years!! argh!

i cant say i dealt with the anger and stress of it well, my health is bad bad because of it and as stated i did have a stroke severe enough to mess me up. lost most of my sight and use of left side.

it took me a long time to even get any law to listen. had the ADA call me at midnite one evening saying "damn john im sorry i did not think there was this much to this"

the law in valdosta ga. actually had her in jail and let here go
that pissed the FDLE and me off bigtime.
i also know of twice she went to court under assumed names and paid fine and left. she is a fugitive in at least 4 counties here in florida for this type of stuff. most likely there is much more i dont know.

i dont even have resources left to join this forum much less
persue her. if i did it would be a bounty hunter like the infamous "dog" as he is the best. the fdle asked me what my goals were i told them to see her ass incarcerated and know her real name. they told me maybe one day on the first but highly doubtful on the latter :( and yes i lived with her for 15 years. thats what bothers me. was any of it real? or all a fraud to clean me out?

i check with the fdle and florida prison system often to see if they have captured her. her assocites that hekped her are still right here but there is nothing i can do. she even writes emails to me to taunt me. i gave the numbers from the isp to the law and any new stuff but its always the same.

not a soul cares or has time, too busy with more major stuff.looking back when this started i should have told them
that i thought she was a terrorist. that would have motivated action. to tell the truth now im not sure she could'nt be with all the money she has gleaned.

my only hope is that "what comes around goes around" for them all.or she steps on a big rattlesnake i also look at it like this i cannot be a victim any more as i have nothing to take except my bulldogs and they wont go i have my freedom and pretty much just try to stay calm as i can. im sure she is off to the next victim. most likely married to change that name and get new id as she lost the 8 sets in her haste to flee here.

i want to talk to mr. rankin or any pro bounty hunter freelance people hunter or any LEO that is willing to help me can mail me direct. hopefully after i complete vocational rehab ill have some funds and will pay whatever they want to
capture this scourge.

this depresses me lots im gonna go talk tractors now

Identity Theft
Website Operations Howto
Replies 16 Post by JLHall

I have a B8200 with the 300 loader on it. Great tractor, built solid as a rock. A dealer in a nearby town has one for sale that is a low hour hydro, 4wd with the 300 loader and he wants $8000 for it in his ad this weekend. At that price I imagine it'll see the back of someone's trailer headed for a new home this weekend.
Speaking of B8200s, guess I'd better get back to my bush hogging before the rain starts again.

B8200 Price
Kubota Tractors
Replies 7 Post by mjw