Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Do you have an update to your starting problem? I bet you have some burnt pistons after it ran hot.

jinma agricat 254 y385 wont start
Jinma Farmpro Agracat Nortrac
Replies 4 Post by bogman

The oil light flashes every 50 operating hours to indicate it's time to change oil. It will continue to do that for about half an hour or so. It is annoying as hell. It always seems to occur when you are doing something under load and it suddenly starts flashing, scaring you momentarily that something is wrong until you remember what is causing it. I am not aware of resetting it and I certainly don't follow the flashing idiot light to tell me when it is time to change oil and/or filter. I would much preferred that the factory would have provided an oil pressure gauge but I'm sure idiot lights are cheaper.

I think the block heater was a good investment. The Perkins engine is a great little engine but it doesn't like waking up in cold weather. If it doesn't catch within the first couple of tries when it is cold I've learned that all the cranking in the world won't get it until it gets warmed up with the heater. It only takes about 20 minutes to warm it up and it makes all the difference.

When starting in cold weather crank the throttle all the way open but be ready to throttle back down as soon as it catches to prevent over-revving the cold engine. Also, keep the fuel tank fuel to prevent condensation and I always treat the diesel fuel with Power Service Diesel Fuel treatment - summer and winter. It is a lot easier to prevent diesel fuel problems than to fix them after they occur.

Cub Cadet 6284D Hydrostatic transmission slow speed
Cub Cadet
Replies 18 Post by boltboss

Good day,I was using my Kioti LB1914 tractor but the throttle was not working. I need to move the gas pedal up and down with my foot to control the rpm .What should I be looking for to fix this?

Kioti LB1914 throttle inactive
Kioti Tractors
Replies 2 Post by BOBBYboy

Please say that snow is from last year ....Interesting idea for carting wood.

Cub 6284D - New Pix by boltboss
Photos
Replies 2 Post by DennisCTB

It would pretty cool if the Woods Backhoe that could fit the smaller B series could also fit the the large L. A B sized how on a bigger L might be fine without the subframe, probably too good to be true :-)

Kubota L3010 backhoe with subframe
Kubota Tractors
Replies 4 Post by DennisCTB

sunwardsteel has posted a new photo.

Subject: metal buildings.

Description: <br>Sunward Steel Buildings was launched in 1972 when founder Danton Wirth became a dealer of steel buildings. Just two years later in 1974, he purchased Wedgcor Buildings a small regional manufacturer of metal buildings, in Jamestown, North Dakota. As a single source manufacturer with factories in North Dakota and South Carolina, we work with you from estimating to engineering and drafting to fabrication and delivery. Visit us at https://www.sunwardsteel.com

metal buildings - New Pix by sunwardsteel
Photos
Replies 1 Post by sunwardsteel

sunwardsteel has posted a new photo.

Subject: Steel Building Kits.

Description: <br>Sunward Steel Buildings was launched in 1972 when founder Danton Wirth became a dealer of steel buildings. Just two years later in 1974, he purchased Wedgcor Buildings a small regional manufacturer of metal buildings, in Jamestown, North Dakota. As a single source manufacturer with factories in North Dakota and South Carolina, we work with you from estimating to engineering and drafting to fabrication and delivery.

Steel Building Kits - New Pix by sunwardsteel
Photos
Replies 1 Post by sunwardsteel

If you rarely change the oil, then I recommend using a synthetic diesel oil and a dealer (stock) oil filter. Synthetic can absorb the long time intervals between changes.

Your intro sounded like an intro for Abused Tractors Anonymous (ATA)! :)

2006 New Holland TC 45 DA
New Holland Tractors
Replies 4 Post by bloggins

i have a 350 DTC that has a leak below the steering wheel and i need help to locate the problem and how to repair it .I do not have a shop manual THANKS

Power steering leak
Long
Replies 1 Post by phil07

I may have a spare spring for the primary--I just rebuilt my spider rollers using bushings I bought through Mcmaster-Carr. As I think more about it, it does seem like parts for those are a bit hard to find. JD used to sell the roller bushings. Now you have to buy a whole spider assy. If the moveable sheave doesn't flop around too much I'd be tempted to run with existing bushing. It seems like the spider and the plastic slides do a pretty good job stabilizing it when assembled.

Primary clutch bushings
Utility Vehicles UTV/ATV
Replies 6 Post by Trainpilot

Problem resolved, thanks to the wife. She was watching as I drove up the grade in our yard and she said the shaft she could see seemed crooked. I had guessed that maybe we had a sheered off bolt on a universal joint. She took the guard off and found the universal was broken. It was missing one bushing or bearing, what ever is on the ends of the center 4 way. She ordered a new universal and I put it on. The fix took about 10 minutes. Good as new now. :)

Kubota BX22 snapping sound in front axle
Garden Tractors
Replies 4 Post by dhr216

John Deere Tractors is one of the popular tractor manufacturer, that offers a wide variety of farm tractors along with agriculture equipment. If you are planning to buy one, just go to Khetigaadi's John Deere Tractor Price & Models Page and choose the right tractor for your farm.

Check John Deere Tractor Prices in India
John Deere Tractors
Replies 1 Post by khetigaadi

I am looking for a repair manual for a 2010 TX Gator utility vehicle

TX Gator repair manual
Utility Vehicles UTV/ATV
Replies 1 Post by Mapache

First, is the engine out of the tractor? The upper pan is bolted to the frame. It is what holds the engine to the front of the tractor. If engine is out or frame and front end is separated, be sure you have all the bolts out. Should be 22 of them.

Repair of 970 John Deere tractor
John Deere Tractors
Replies 3 Post by jdgreen

The knob that you are referring to is for the the 3 point arm speed for up and down movement.

1985 MF 1020 Knob under seat
Massey Ferguson Tractors
Replies 3 Post by tbear640

What happened? I had to buy a new shaft for my 1500. Could not come up with any alternative.

There are several used tractor/import part places. Use Bing to search.

ford 1700
Antique Tractors
Replies 2 Post by harvey

A month ago I bought a 610 that had been sitting the about the same amount of time. I changed the fuel filters, the lift pump has to be in the right spot on the crank to use the manual pump arm. I had to open the injector lines and use a rag soaked in gas over the air inlet and let it run on that to bleed the injectors.

Starting issues on a 610 long tractor
Long
Replies 5 Post by matt4574

Thanks, I’ll try that!!

210 Compact tractor o-rings
Massey Ferguson Tractors
Replies 3 Post by ToolmanT

Change any & all rubber fuel lines in the system.

They deteriorate and get soft, they then allow enough fuel to pass to let the machine idle but when you apply more power the line collapses and starves the engine of fuel.

Best of luck.

Belarus 250 loss of power then won t start
Belarus
Replies 7 Post by Murf

Ford compact Hyd adapter plate
Antique Tractors
Replies 2 Post by KennyG