Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Sounds like a new air filter (or back blow out the current one if it isn't real dirty) is in order.
2. Warm the engine and change oil and filter to your nearest dealer's recommendations for oil and filter.
3. Grease all lube points.
4. Check for proper tire inflation.
5. You may want to change out your fuel filter. Be careful doing this, you may lose your prime. It is a messy job to prime it.

Replacing antifreeze is another consideration. Sometimes the rust inhibitors in the antifreeze,break down and a flush I'd good.

Do all of the above more often!!!

2006 New Holland TC 45 DA
New Holland Tractors
Replies 4 Post by Hogslayer

I had a similar problem once. It turned out that the hydraulic filter was partially clogged and would collapse under use, giving jerky motion. The other portion of yoirbproblems sounds like a loose electrical connection.

Cub Cadet 6284D Hydrostatic transmission slow speed
Cub Cadet
Replies 18 Post by Hogslayer

I have a Kubota B-2910<br>
has a Woods Mfg. Backhoe and has a separate Sub Frame besides the<br>
brackets bolted into the tractor.<br>
I modified the brackets slightly<br>
so I don't have to unbolt anything<br>
when removing the backhoe. <br>
All works great<br>
Woods Mfg. is in Los Angeles Area.<br>
<br>
[l]https://www.woodsequipment.com/[/l]<br>
Let me know if you need my backhoe model #<br>
<br>

Kubota L3010 backhoe with subframe
Kubota Tractors
Replies 4 Post by donnaandmax1

i have a 350 DTC that has a leak below the steering wheel and i need help to locate the problem and how to repair it .I do not have a shop manual THANKS

Power steering leak
Long
Replies 1 Post by phil07

I may have a spare spring for the primary--I just rebuilt my spider rollers using bushings I bought through Mcmaster-Carr. As I think more about it, it does seem like parts for those are a bit hard to find. JD used to sell the roller bushings. Now you have to buy a whole spider assy. If the moveable sheave doesn't flop around too much I'd be tempted to run with existing bushing. It seems like the spider and the plastic slides do a pretty good job stabilizing it when assembled.

Primary clutch bushings
Utility Vehicles UTV/ATV
Replies 6 Post by Trainpilot

Problem resolved, thanks to the wife. She was watching as I drove up the grade in our yard and she said the shaft she could see seemed crooked. I had guessed that maybe we had a sheered off bolt on a universal joint. She took the guard off and found the universal was broken. It was missing one bushing or bearing, what ever is on the ends of the center 4 way. She ordered a new universal and I put it on. The fix took about 10 minutes. Good as new now. :)

Kubota BX22 snapping sound in front axle
Garden Tractors
Replies 4 Post by dhr216

John Deere Tractors is one of the popular tractor manufacturer, that offers a wide variety of farm tractors along with agriculture equipment. If you are planning to buy one, just go to Khetigaadi's John Deere Tractor Price & Models Page and choose the right tractor for your farm.

Check John Deere Tractor Prices in India
John Deere Tractors
Replies 1 Post by khetigaadi

I am looking for a repair manual for a 2010 TX Gator utility vehicle

TX Gator repair manual
Utility Vehicles UTV/ATV
Replies 1 Post by Mapache

First, is the engine out of the tractor? The upper pan is bolted to the frame. It is what holds the engine to the front of the tractor. If engine is out or frame and front end is separated, be sure you have all the bolts out. Should be 22 of them.

Repair of 970 John Deere tractor
John Deere Tractors
Replies 3 Post by jdgreen

The knob that you are referring to is for the the 3 point arm speed for up and down movement.

1985 MF 1020 Knob under seat
Massey Ferguson Tractors
Replies 3 Post by tbear640

What happened? I had to buy a new shaft for my 1500. Could not come up with any alternative.

There are several used tractor/import part places. Use Bing to search.

ford 1700
Antique Tractors
Replies 2 Post by harvey

A month ago I bought a 610 that had been sitting the about the same amount of time. I changed the fuel filters, the lift pump has to be in the right spot on the crank to use the manual pump arm. I had to open the injector lines and use a rag soaked in gas over the air inlet and let it run on that to bleed the injectors.

Starting issues on a 610 long tractor
Long
Replies 5 Post by matt4574

Thanks, I’ll try that!!

210 Compact tractor o-rings
Massey Ferguson Tractors
Replies 3 Post by ToolmanT

Change any & all rubber fuel lines in the system.

They deteriorate and get soft, they then allow enough fuel to pass to let the machine idle but when you apply more power the line collapses and starves the engine of fuel.

Best of luck.

Belarus 250 loss of power then won t start
Belarus
Replies 7 Post by Murf

Ford compact Hyd adapter plate
Antique Tractors
Replies 2 Post by KennyG

I bought a 2011 JD Gator XUV at auction. Says motor blown compression problems so I figure a rebuild or new motor<br>
<br>
Problem is I am having trouble finding parts<br>
Product I�d 1M0855DSKBM017438 which means it is a 3TNV70 motor but ASA or HGE?<br>
<br>
Help with the correct motor number would be great. Help with rebuild kits finding them and part numbers would be even better

2011 Gator 855D blown motor
Utility Vehicles UTV/ATV
Replies 1 Post by dmwmbacpa

That's Great, Thanks

Kioti NX6010 filter cross ref
Kioti Tractors
Replies 3 Post by KiotiNorth

Thanks alot I will try that again on the bleed procedure and replace the fuel filter I havent done that yet

jinma agricat 254 y385 wont start
Jinma Farmpro Agracat Nortrac
Replies 4 Post by pjgunner01

Thank you very much!

Help with 1965 Ford 4000 3 cyl diesel
Antique Tractors
Replies 3 Post by jimbarnett

Ford compact Hyd adapter plate
Parts and Repair
Replies 2 Post by KennyG