Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Generally on all diesel engines the fuel shut off has to be pushed in all the way. If mechanical you can follow the cable to the pump. If electric or a solenoid type this has to activate and allow fuel to flow. On all diesels though you have to have your pump also primed. It may not be just the shut off.

Engine won t fire on JD 770
John Deere Tractors
Replies 6 Post by mnavojos

Thanks! I have not worked on it for a couple of weeks but have the injectors out,,

Where to have Yanmar Injectors cleanedchecked
Utility Vehicles UTV/ATV
Replies 5 Post by pposey

My prvt messg is not working or it is do to operator error.... any how MF205-4 serial # 00694, that should make it a '81..? my previous reply to this thread has the pick of my damaged parts. Let me know if there is any other info you need. via my direct Hotmail account or pvtmessg here)
ps: I am getting prvtmessg email notification's
Thanks much
Arlen

MF205-4 anyone
Massey Ferguson Tractors
Replies 11 Post by cansox12

I would like a breakdown of this. And a rebuild kit. I am also needing a new washable screen, that one is full of holes!

Anyone have any info on this tractor
Jinma Farmpro Agracat Nortrac
Replies 8 Post by Chaos921

Chaos921 has posted a new photo.

Subject: Allied.

Description: <br>Allied tractor

Allied - New Pix by Chaos921
Photos
Replies 1 Post by Chaos921

Update: Mower starts perfectly on first crank every time now.
I think when I discovered that seemingly insignificant leak while pumping with the bulb, I found the source of the problem. The leak was a very small hose crack at fitting coming of filter to injection pump.

Yanmar Fuel pump or primer bulb
Parts and Repair
Replies 8 Post by Coachlarry

Electric over Hyd p21f
Shibaura
Replies 4 Post by shovelhead

Okay. Are you aware that the live pto and hydraulic lift pump both drive from the same source. When the pto portion of the clutch is disengaged, both of them stop turning, not just the pto shaft. If you now find that neither is working at all, your problem could be in the clutch itself. Have you removed the cover plate from under the bell housing and looked for anything unusual in that area? You may find fragments of clutch lining and/or other evidence of disc or clutch failure.

mf 255 pto and 3pt lift not working
Massey Ferguson Tractors
Replies 5 Post by Imfedup

Just thinking here you will be gaining six horsepower but you have to much if you are spinning! You could add industrial tires for about 400. dollars or you could try a land pride driveway scraper for about 1,200 which is faster and doesn't have the issue with digging in more then you set the machine and in less time you can have a perfect driveway. The dealer would probably take your box blade in trade!

B2601 vs bx1800
Kubota Tractors
Replies 3 Post by Art White

Changed oil in the long today.And i cleaned and lubed the hydraulics levers and linkage.Works much better'Think i will drain all the hydr out and put in new that may make it even better.And there is only a suction screen filter.Think i will try to get a operater manual for the tractor so can get the right fluids.

long hydrauliics
Long
Replies 4 Post by tinker

Hey GrizzlyHackle... I have a 2001 JD4200, would you like me to post pix of my 3ph setup?
It may help you find the parts that you need.

3ph assembly for JD 4200 - Nice forum
Operating and Attachments
Replies 51 Post by LoneStarOH

I just bought a new BX23S 2 days ago. I've backhoed a ton of dirt trying to open up culvert pipe under my driveway that was almost completely under dirt that had filled in in front of it. I bucket loader graded the banks of this dry stream bed, and hauled all the dug out material up by my corral to fill in low spots. So after 2 days of using this machine, I have to say it is amazing. It has plenty of power...enough to lift up a big pile of hardened concrete that was dumped by my field after they poured my barn slab. I totally love the back hoe.
So about the "how strong is it" question, I'd say strong enough. This is my 4th Kubota; two were bigger and one was a bit smaller, but out of all those tools, this one makes the most sense to me on my 6 acre mini ranch.

How strong is the Bx23
Kubota Tractors
Replies 23 Post by donnyd48

I just finished rebuilding mine using drill bushings, with a bronze bushing pressed in. Had to bore the bronze bushings for the pin size. Worked for me.

Metal rollers for 4x2 JD Gator primary clutch
Utility Vehicles UTV/ATV
Replies 19 Post by vaughn45

If there is a chance that they froze do to being discharged they are not worth taking the time to charge!

charging dead batteries
Belarus
Replies 3 Post by Art White

I need a wiring schematic for a new Holland TN 70 a

Wiring schem
New Holland Tractors
Replies 2 Post by Tkbaker

I'd start by examining your ground to see whether it has worked loose or been torn off by brush etc. If there is no obvious damage then check it for continuity. Sometimes it may look fine at the terminal and be corroded under the insulation.( found this out the hard way on one of my boats).

The other thing you may want to do is read your manual to see if there are any automatic kill switches hidden away anywhere. Lots of the smaller hobby tractors have them now (under the seat is common) and they are a royal PITA!

My starting bet would be on a loose or damaged ground as you say you were clearing brush, - lots of snags to tear things off. I've had harnesses separated as well by branches from time to time. Usually no damage, just clip it back together.

New Holland TC26DA Ignition Switch Issues
Parts and Repair
Replies 2 Post by cheapscot

I have a 2007 NH TC26DA with about 700+ hours on it. Was using to clear trees the other day and it wouldn't restart after I shut it off. I had started it multiple times prior. When I turn the key none of the gauges glow plug indicator lights etc. work. Checked all fuses and none are blown and battery voltage is normal. Has anyone had a similar issue that could aid me in resolving this problem? <br>
<br>
Thanks,<br>
Gene D. Smith

New Holland TC26DA Ignition Switch Issues
Parts and Repair
Replies 6 Post by gsmitty55

[QUOTE=TTThomas74;196213] Thank you very much this was very helpful. You were exactly right.God Blesd [/QUOTE]

Did you get your problem fixed?

Belarus 310 does not shift gears
Belarus
Replies 5 Post by agmonkey

I notice that this is an old thread but do you actually have a source for Jinma Y485 engines in stock? If so, I would like to get a quote on a replacement engine for my 2007 Jinma 354

[QUOTE=jadezhang;194121] Y485 engines and engine parts for saleAll the Jinma tractor spare parts for salejade(at)shunyumachinery.com [/QUOTE]

Jinma Y485 injector pressure
Jinma Farmpro Agracat Nortrac
Replies 10 Post by MontyJones

I have an Agracat 3720 Magnum that I'm trying to locate a manual for as well. My clutch went out and I need some sort of manual to get started. Can anyone help? Thanks.

agracat manual
Jinma Farmpro Agracat Nortrac
Replies 16 Post by decajeaux