Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

The 2,000 hours doesn't bother me! That has been a very reliable tractor and you are far less then half way through it's life!
The 4,000 for a new loader and valve is not out of line at all and at a minimum you will have increased your tractors worth by nearly 2/3rds the price of the loader. The Kubota loaders are awesome and the valves they use make it really easy with the multi tasking ability.

2000 B2710 I need a loader dealer wants over 4K any suggestions
Kubota Tractors
Replies 13 Post by Art White

i have oil in my radiator but no water in the oil pan? any suggestions it runs great is there any where that hydraulics or engine oil can mix

farm pro 2420
Jinma Farmpro Agracat Nortrac
Replies 2 Post by grfproy290

Kabota jug says meets or exceeds j20c . Thanks for info.

type of fluid for transmission 07 4x2 gator kawa motor
Utility Vehicles UTV/ATV
Replies 3 Post by fishy1

[QUOTE=dbergan;196334] I'm in the process of rebuilding the engine in my JD 2005 HPX Gator.It has the same engine and is not fuel injected.I doubt if this older 6x4 that you are looking at is fuel injected either.Talk to the folks at ATVWorks.com for parts and see if they can help you out 1-866-436-3478 [/QUOTE]

Thanks, I'll check them out.

6x4 engine rebuild
Utility Vehicles UTV/ATV
Replies 6 Post by Cheapsnake

That's a great tip ref the PTO and control valve. I will put it on my too do list. I have only had this machine 3wks. It's a 2002 model. Several problems to sort out plus full service.

Nortrac Tractor Power Steering Replacement
Jinma Farmpro Agracat Nortrac
Replies 12 Post by Blightycol

My Mitsu 1600 D II has very good tires, a brand new clutch, a recently serviced starter, exhaust routed down under foot rest, sheet metal somewhat rusty but sound, custom made debris screen in front of radiator, custom replacement SS grill. Hydraulic screen has been cleaned and lift works well. One link in the 3 point has been replaced by a heavy chain, another link has been repaired with a weld. Original fuel filter replaced with an in-line when I broke the sight glass.<br>
<br>
This is a strong tractor, always does what I want it to. I got it in 2001 at 800 hours and it now has 1140. I have mainly pulled a 4' brush hog with it, and pulled a small trailer around the farm.<br>
<br>
It needs a starter solenoid now, and I have been unable to find one, so I have decided to sell it at a loss for $1200.<br>
<br>
I don't care to part it out, but if you just need some parts, you may want to consider buying it for the parts you need, then parting it out yourself, as there are many of these in the country and parts are scarce.<br>
<br>
Located in NW Arkansas. Please respond with any questions.<br>
<br>
thank you !

Mitsu D1600 FOR SALE
Mitsubishi
Replies 4 Post by mblossom

Thanks,I'll get the part number to you soon.

1985 massey 1040 4x4
Massey Ferguson Tractors
Replies 5 Post by redpie

MT180D Diesel

Mitsu 1600 D II For SALE or PARTS
Mitsubishi
Replies 6 Post by ashleyhetz

Your email seems to be incorrect! Please let me know.
Skip

Mitsubishi D1600 II Diesel Cylinder Head
Mitsubishi
Replies 5 Post by skippybob

Hi. Would greatly appreciate somehow getting a copy of the owner's manual.

Duerr hp 678 Chipper replacement blades
Operating and Attachments
Replies 86 Post by Massey1

What will this tell me, and is it a bad sign of massive overhaul?

Oil overflow from tube and Smoke
John Deere Tractors
Replies 4 Post by primalman

Blade followed by a brush hog

What Rear Tractor Implement Do You Use Most Survey
Operating and Attachments
Replies 22 Post by taogden

I traded mine in at around 150 hrs and it was doing like yours when I got ride of it. We had a family friend as a JD salesman and he said it was the TPS. Don't know for fact but it made since. A little history on mine was it dump gas in the oil from day 1 even when it ran fine. They gave me letter from JD saying I did not run it long enough to heat up and evaporate the gas that got past the rings and into the crankcase "that all gas engines do". I got an 855D and it seams pretty good, I would not of got another JD but could bring myself to sell or trade in to anyone other than JD since they built and wouldn't stand behind the POS.

Gator 620i gas in engine oil
Utility Vehicles UTV/ATV
Replies 54 Post by ejack11

What do you want for the tractor?

d1600 grill
Mitsubishi
Replies 5 Post by skippybob

While you had it off, could you get the gear to slide out/in manually?

Mitsubishi 1600 ignition switch wiring
Mitsubishi
Replies 18 Post by Cyrus55

Hi!

My Mitsu D1600 II has very good tires, a new clutch, a recently serviced starter, exhaust routed under foot rest, sheet metal somewhat rusty but sound, custom made debris screen in front of radiator, custom SS grill plate in front. Lift works well. One stabilizer has been replaced by a heavy chain, which works fine.

This is a strong tractor, always does what I want it to.

It needs a starter solenoid now, and I have been unable to find one, so I am forced to sell it as is, or part it out.

Need any parts? Let me know!

thanks.

~Mark

Mitsubishi D1600
Mitsubishi
Replies 8 Post by mblossom

Hi!

My Mitsu D1600 II has very good tires, a new clutch, a recently serviced starter, exhaust routed under foot rest, sheet metal somewhat rusty but sound, custom made debris screen in front of radiator, custom SS grill plate in front. Lift works well. One stabilizer has been replaced by a heavy chain, which works fine.

This is a strong tractor, always does what I want it to.

It needs a starter solenoid now, and I have been unable to find one, so I am forced to sell it as is, or part it out.

Need any parts? Let me know!

thanks.

~Mark

MItsubishi 1600
Mitsubishi
Replies 9 Post by mblossom

Hi!

My Mitsu D1600 II has very good tires, a new clutch, a recently serviced starter, exhaust routed under foot rest, sheet metal somewhat rusty but sound, custom made debris screen in front of radiator, custom SS grill plate in front. Lift works well. One stabilizer has been replaced by a heavy chain, which works fine.

This is a strong tractor, always does what I want it to.

It needs a starter solenoid now, and I have been unable to find one, so I am forced to sell it as is, or part it out.

Need any parts? Let me know!

thanks.

~Mark

Mitsu MT1600D
Mitsubishi
Replies 4 Post by mblossom

Hi!

My Mitsu D1600 II has very good tires, a new clutch, a recently serviced starter, exhaust routed under foot rest, sheet metal somewhat rusty but sound, custom made debris screen in front of radiator, custom SS grill plate in front. Lift works well. One stabilizer has been replaced by a heavy chain, which works fine.

This is a strong tractor, always does what I want it to.

It needs a starter solenoid now, and I have been unable to find one, so I am forced to sell it as is, or part it out.

Need any parts? Let me know!

thanks.

~Mark

D1600
Mitsubishi
Replies 4 Post by mblossom

Take out the hydraulic fluid screen and clean it. It is under an access plate on the lower side of the transmission.

This fixed mine with the same trouble.

By the way, I am selling or parting out my Mitsu D1600. Need any parts? Has very good tires, etc.

~Mark

Mitsubishi d1600fd hyd Pump does not lift
Mitsubishi
Replies 2 Post by mblossom