Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Hello all, I am new to your forum and am really hoping somebody on here can help me. I have MITSUBISHI MT2501FD the FEL will not raise unless I raise the 3ph first and after the 3PH has been raised it will raise regardless of direction spool is moved. It will not lower unless I lower the 3ph--even with tractor shut off<br>
<br>
it has an external hydraulic pump ran off the front of the tractor comes back to what I think is a diverter or priorty valve where it splits to loader control vavle and to rear 3ph. The return line from the loader control vavle also runs to "something" before returning to rear end sump.<br>
Any ideas would be appreciated

Hydraulic Gremlins
Loaders Back Hoes
Replies 2 Post by Scrub868

Drive belts are the most common cause! You will find excellent tutorial from a company called Aeen on proper drive belt fit. They are my clutching masters!

Ability to creep
Utility Vehicles UTV/ATV
Replies 5 Post by Art White

thanks for the info. does your book show or tell anything about the timing marks on flywheel. i have been able to find tdc, but i dont know how much to turn flywheel to find 14 degrees before tdc. if i turn it a inch, more or less. also does it tell anything about a timing mark on the clutch bellhousing. thanks

taishan tractor help help
Other Tractor Brands
Replies 3 Post by bemike61

Hi Thanks guys its in place but no lights guess I have a fuse to find :)

hinomoto c174
Hinomoto
Replies 5 Post by torchyboy

Carolinablue, thanks for the manual link. After looking at the manual and the wheel assemblies I find mine does not have the power stance option. With the weight involved I think it is going to be a time consuming job, but I can do it.

I'll get to break in my new engine hoist and air gun.

Thanks again for the manual. Ken

Widening stance on Long 2360 to match cultivator
Long
Replies 3 Post by krb1945

Retail difference is about 3,300 on the tractor.. The resale with the Kubota's is very consistent from one end to the other.

Size Kubota for Homeowner Use
Kubota Tractors
Replies 7 Post by Art White

exact allis chalmers part number is 2100548-3. need two if availible. it is a two piece seal. seals where the axil goes into the housing on a 4 wheel drive.

1983 Allis Chalmers 6140 4WD
Other Tractor Brands
Replies 3 Post by Reddevil1

Need a shop manual for D 23 MF tractor

Shibaura D 23
Shibaura
Replies 1 Post by rontenman

Click on Manuals, Massey Ferguson, scroll down to 240
I think this is the Owners and Service manuals.
not free, but if you wanted to buy

240 Massey
Tractor Projects
Replies 3 Post by arcwelder

[QUOTE=Chazster3;195894] I have a Kioti ck2510 with a dummy oil light coming on at startup.Where do I hook up a mechanical oil gage on it? [/QUOTE]
They will come on when you turn on the key, and for a couple seconds when first started till the pressure builds up.

LB1914 Low oil pressure
Kioti Tractors
Replies 12 Post by DK35vince

I have the opportunity to be given the above. It does not run but, the Kohler engine turns freely. I know this topic has been brought up before but, any ideas on a manual...parts...worthwhile getting it? I have 3 acres to grass and brush cut.<br>
<br>
Karl

Roof VP75 lawnmowerbrush cutter
Garden Tractors
Replies 5 Post by karlthev

[b]To Disconnect [/b]

Shut engine off.

Move Control Valve in all directions twice.

Disconnect hydraulic hoses.

[b]To reattach shut engine off[/b]

Move Control Valve in all directions twice.

Reattach hoses

Problem Connecting Hydraulic Hoses
Loaders Back Hoes
Replies 17 Post by minimac

I am always tempted by low prices that King Kutter has and wonder how bad can cheap stuff be? That said I have usually gone with Landpride as long as the piece is not goin to empty my bank account.

KingKutter vs Landpride
Operating and Attachments
Replies 24 Post by minimac

I think you should ad Kubota to your list of quality manufacturers.

2006 New Holland TN60-A Transmission The NHTractors are Junk
New Holland Tractors
Replies 2 Post by minimac

It all depends. If you think you might eventually want to remove the pole barn, concrete will not be your best choice.

Otherwise gravel can be a real hassle in so many ways, just drop a nut or washer on gravel and try to find it! Ans as posted jacking anything up to work on is unsafe.

So if is just the cost, concrete is worth it as long as you plan on making it permanent.

stone vs concrete floors
Barns Pole Barns
Replies 6 Post by minimac

I have a John Deere Gator 4 x 2 that has been well maintained, (garage and trailer kept) I started it this morning upon arriving at the 'job site' and it expelled thick white smoke for several minutes as well as oil through the exhaust. It left stains in the trailer, on the road, as well as in the cemetery we were working on. After running for a while, it abruptly stopped. No more smoke and no more oil. Does anyone have any idea as to what may have caused this to happen ad should I be concerned? Thank you.

2000 John Deer Gator 4 X2
John Deere Tractors
Replies 3 Post by Moskoman2312

ok anyone in need of DougFeng tractor parts Call Chip 479-705-2200. He has parts. Real nice guy. And Sandy the receptionist is very friendly and has not 1 problem helping also.......

Taskmaster Trooper 426e 4x4 - need parts
Jinma Farmpro Agracat Nortrac
Replies 4 Post by bbqhoncho

Most are available from your dealer. There is not enough demand for the after-market.

I need some OEM Quality decals for a B7500 DT-TLB
Kubota Tractors
Replies 2 Post by Art White

Where do I hook up the mechanical Guage on my Kioti ck25? My oil pressure light comes on and stays on for 45 seconds after start up. Seems like maybe a sticky pressure valve.

Low oil pressure on my KIOTI CK25
Kioti Tractors
Replies 1 Post by Chazster3

Where do I hook up the mechanical Guage on my Kioti ck25? My oil pressure light comes on and stays on for 45 seconds after start up. Seems like maybe a sticky pressure valve.

Low oil pressure on my KIOTI CK25
Kioti Tractors
Replies 1 Post by Chazster3