Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Your tractor model is a subcompact so at least it is a little lower to the ground. As Ken said I would not deflate the tires like you see people do at the beach with 4x4's.

You should make sure the tires are not over inflated though. With the tractor fully loaded with an operator sitting on it check on a concrete floor that the tire tread is in full contact and adjust pressure until it is.

Deflating tires for better slope control
John Deere Tractors
Replies 3 Post by DennisCTB

I know little about a Kioti but the brakes most likely run in an oil bath using the hyd/transmission oil. Try oiling any and all linkage points and see if that helps.

Kioti LB1914 feels like brake is on Will not drift
Kioti Tractors
Replies 4 Post by kthompson

Belarus Parts
Belarus
Replies 9 Post by videorov

well good news. Since only the power wire was broken we just bypassed the connection. we ran a fuse into the wire, wrapped it in shrink wrap and sealed the harness back up. also filled it with dialectic grease so we wont have any more water issues.. hopefully problem solved.

1999 DK45 ignition issues
Kioti Tractors
Replies 6 Post by OLmassey

The best time to sell is when you find someone that is really interested. I'd buy them all day long if the price is right for me but it doesn't mean it is right for you.

Watch tractor house and fast line to find comparables and remember the dealer will normally accept offers. So price accordingly.
Most people buy more towards spring. Try craigslist.

Not sure how to price for sale
Kubota Tractors
Replies 5 Post by Art White

Just because your tractor doesn't have the mid PTO option, doesn't mean the harness won't have the necessary wiring/connectors for it. Should those wires somehow become damaged over time and the related circuits make/break for whatever reason, the indicator lights and related actions may well come and go. Check the area(s) where such switches and sensors would be if installed. Look for signs of damage to wires or harness connectors that aren't currently in use, but may have been stowed somewhere nearby.

Phantom mid PTO signal shuts off engine and keeps it from starting
Kubota Tractors
Replies 2 Post by Imfedup

[QUOTE=roadmaster98;140246] I backed into a tree with my new 6ft rake.It bent 5 tines and twisted the angle iron thay are atched to.Does anybody have any ideals on the best way to bend it back it workable shape.Thanks for any help. [/QUOTE]

You can use the firefighter�s & farmer�s rakehoe is designed for raking combustible debris, chopping fire breaks, and scraping back bark from trees. These are best for twisting trees. Complex landscaping is usually difficult to tackle. Therefore, you can contact landscape professionals for doing this job.

Bent Landscape rake
Garden and Landscape
Replies 3 Post by josephferpes

I second BigRol. Look for a flarenut crowfoot ( much smaller required clearance which should cost you less than $10). The other thing is to close your eyes when setting the wrench and imagine what you are trying to do as you do it rather than actually watch it.( after first having looked to see what you want to accomplish) This seems counter-intuitive, but we are actually set up to do this as our sense of touch is generally far more accurate than our visual coordination. -This trick also works for a lot more things than simple mechanics.<br>
<br>
The only thing I would add is if you have had to remove screws from the plastic covers to get at the steering try to replace them with real automotive steel ones. I've had several Kioti Phillips screws strip on me with minimal pressure, so they certainly aren't the grade 8 steel they are coloured to look like. ( I would say they are closer to grade 2 as I have never had the same problems with other fasteners, even grade 5 ) - A few cents can save you a great deal of headaches later.<br>
<br>
<br>

power steering hose
Kioti Tractors
Replies 5 Post by cheapscot

This looks like a casting which I guess is real hard to
weld, has anyone ever welded this stuff.

Miller stick weliding the brake housing on 250AS
Belarus
Replies 4 Post by videorov

We have sold a couple of B-8200's this season that were in good shape hours are hard to tell as they only have a three digit hour meter.
The prices were about the same, both hydro's one with front blower, ag tires and power steering, the other with a loader and no-power steering. We got 5,500 a piece for them.

Kubota L2250 help
Kubota Tractors
Replies 14 Post by Art White

Yes, you can weld cast iron with a stick welder, but.......

First and foremost, you need the right materials, Softweld 55% nickel or the equivalent rod.

Second, it's not for inexperienced welders and the rod is pretty spendy so it may not be cheap to practice either.

All in, IMHO you should have a welding or machine shop do the repair for you, especially given the precision required. After all you want a smooth flat face and accurate bolt holes when you're finished.

Best of luck.

Can you Stick weld this Brake housing with broke flange edge
Articulated Tractors
Replies 3 Post by Murf

hi greg g you still around, you have been helpful in the past. need timing help with my ts 304a taishan. you can read some of my post. thanks

taishan greg g
Jinma Farmpro Agracat Nortrac
Replies 1 Post by bemike61

hi greg g are you still around. you helped me few years ago about replacing clutch in taishan ts 304a 2 cylinder

How do I get out the fuel pump on jinma 224
Jinma Farmpro Agracat Nortrac
Replies 11 Post by bemike61

auerbach, thanks for the words of wisdom.the simply solution are the hardest to see.so I drain the oil and put my 3.6qts in .so now I see the right reading on the stick.Funny thing is while doing this I find a sticker on the under side of the hood cover and it said the tractor should take 4.3qts. so I'm thinking??replacement parts from a different model??

Kioti 1924 dip stick markings
Kioti Tractors
Replies 4 Post by BOBBYboy

Saying they never worked..since new or new to them meaning did they get it used?

Hard to believe four sending units would all be bad but possible. I would try to test with volt meter and see if you can detect any voltage change on oil pressure sending unit from not running to idling. If none then think sending unit is bad. Again hard to believe all four sending units are bad unless there was a voltage spike to the system.

Is there a connection where all the wires are in a single plug and by change it is not plugged in correctly, like it is roated 180 degrees throwing all circuits off?

Jinma tractor king 200
Jinma Farmpro Agracat Nortrac
Replies 3 Post by kthompson

The rings won't seat in 1 hour.Vary your speed & don't work it hard. Pull the injectors & have them pop tested.

oil from exhaust 1715 tractor
Shibaura
Replies 7 Post by lsheaffer

ctucker, glad you found a part. Do try to solve the issue that caused it to break. kt

Broken clutch housing on 7275
Cub Cadet
Replies 8 Post by kthompson

Thank you.

Windows for an existing metal building
Barns Pole Barns
Replies 9 Post by dane714

Dadsstuff sorry for your loss.

With two excavators am assuming he was in business. If so he had friends in the business and knew those to stay away from. Reach out to his friends and even the dealerships of those brands there for help. There is two issues with my suggestion, one they may want the machine themselves and low ball the price and the other is they may not have broad enough experience to give an accurate price. His friends phone numbers are probably in his cell phone if you have that. I would try to get two to help me on price and if they are near each other probably will be ok if not get a third estimate. But the suggestion to check those web sites is very good. kt

Not sure how to price for sale
John Deere Tractors
Replies 4 Post by kthompson

Of the brands I handle METEOR & Allied/Farmking or the most reasonable priced.

Backhoe for 1020
Massey Ferguson Tractors
Replies 10 Post by lsheaffer