Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

been there, done that, spent a bunch of $ when I didn't need to. rules are no html posting but if you'll go to the search box, while you're in this forum, and search on my username you'll find what my deal was (mr. mopar started the thread). I did clean the carb, which needed it, but the root cause having to run with the choke was the cheap little plastic restrictor had fallen out of the air intake tube.

I put the bigger jet in but didn't really need it. good luck.

John Deere Gator 6x4 only runs on choke
Utility Vehicles UTV/ATV
Replies 7 Post by bgreen2299

Sounds like a grounding issue, or cross powering. Maybe disconnect and isolate to see if its fuel or dump motor. Just go back and start from scratch. Temp. wire up so you can remove wires easily to find the culprit.

John Deere Gator Electrical Wiring
Utility Vehicles UTV/ATV
Replies 7 Post by korange

I am looking for electric sprayer controls but find very little info on them so far. Have three section boom system and need about 12 to 14 gpm. Only system that shows a gpm that I have seen is 8 but not clear if for all the boom sections or per each, big difference. Any suggestions on brand, source or the electric boom control systems would be appreciated. kt

Sprayer GPM controls
Parts and Repair
Replies 5 Post by kthompson

There are salvage companies and such who deal in old parts and also a MF dealer may can order it. kt

Masey Ferguson MF1030 loader hydraulics
Antique Tractors
Replies 4 Post by kthompson

Lacking much info on this,I would take a look at Tractorhouse.com and compare yours with what you see there. prices range widely even as simply configured as yours appears to be, add about 650 for the brush hog.
It appears the price of yours will be somewhere around 15,000, things that will help, one owner, garaged, proper maintenance records, condition.
Another source you might try is Machinery Pete, don't know if he tracks small stuff like this, but if he does, he will have records for what these items have sold for at auction in your area.

2005 Kubota B3030 tractor w130 hours
Kubota Tractors
Replies 4 Post by taogden

hey guys im new here I have a customer with a MF 245 the 2 arms coming off the top of rearend for the 3pt hitch is dropping down with just a bush hog on it use to hold it up fine what could it be guy any info would greatly be appreciated thank u

MF 245 need help with hydraulic 3 pt hitch leaking down
Massey Ferguson Tractors
Replies 4 Post by fordon44s

Took loose main battery ground to tractor frame, every things working like it should. Strange it would start tractor ok, but not have enough ground to mess up safety lights.

tc-30 warning light problem
New Holland Tractors
Replies 8 Post by garlic

Dennis, Thank you for the reply. Yes, it was full throttle with blades running when it reved up to the higher RPM's.

Garden Tractor speeds up while Mowing
Garden Tractors
Replies 5 Post by soapteach

Hello Jerry,

I hope you have it fixed by now but more info is needed if you still need help.

What does "pulls plug loose" mean? Do you mean it pulls the pto shaft from the mower? If that is it your issue may be simple: first there is a pin of some sort that holds the pto shaft onto the shaft on the mower. It may be a shear bolt if a smooth shaft that is what you should find and it probably does not have a true clutch on the pto shaft but if a spline shaft then normally what you will find is a pin you push in that is spring loaded. You could also find there is a collar on the shaft you pull back to the pto shaft to release it. If the shear bolt or pin then replace. If one of the last two then try lubing the push locking pin or collar and check for trash on them. Often they will rust or just junk sticking to them causes them to "stick" open or locked. kt

lt1050 mower clutch spins and pulls electrical plug out
Cub Cadet
Replies 2 Post by kthompson

A hydraulic block was available as an option or you can cut the pressure line & plumb the loader in series with the 3 point. I can supply a loader built for the 1030. I can be reached at parts at sheaftractor.net

MF 1030 need auxilary Hydraulic Output anf Return
Massey Ferguson Tractors
Replies 4 Post by lsheaffer

I was buying from Circle G and they were good when buying but have a problem in warranty and they won't talk to you. No email or answer.,

Farm Pro 2425 Parts Supplier
Jinma Farmpro Agracat Nortrac
Replies 9 Post by larrydrifter

Haven't looked at it yet as it is in next county and friend of a friend. He removed cable but something inside is impeding movement. Anybody know anything about this?

06 Foton 404 fuel shutoff trouble
Other Tractor Brands
Replies 5 Post by DwayneOxford

I got that figured out and am on to another issue I don't think will be so easily diagnosed.

When I lift my back blade or anything with weight on the 3pt, the tractor starts to shimmy/vibrate and the 3pt slowly drops. The arms will lower all the way when I park and shutoff the tractor too.

The trans dipstick shows full. I got this tractor from my grandfather a couple weeks ago. It only has 1400 hrs so I'm hoping just a full hydraulic oil and filter change will fix this.

Any idea?

Thanks.

Ford 1700 Loader Control Adapter
Antique Tractors
Replies 5 Post by swizcore

Contact me at parts at sheaftractor.net for pricing.

Yanmar 2000 over heated
Yanmar Tractors
Replies 10 Post by lsheaffer

I can honestly say I'm happy with my 404. I have about 200 hrs on it now and the only issue is electrical connectors lose connection over time. I pull them and spray with crc electrical cleaner. In a recent post a guy just bought from northern tool and said the tractor has foton all over it. He says they are now servicing them. I haven't called to verify that info.

FOTON TRACTOR Review
Jinma Farmpro Agracat Nortrac
Replies 13 Post by yocsr1

gatoraider thanks for your advise. In reading the forum I was hoping it would be you who answered my question. It makes perfect since and knowing that might be the problem, I will take your advise and just live with it. Motor runs smooth, no oil smoke, always starts up. Doesn't seem to have much compression but still runs strong and will pull a truck. Thanks

07 gator 4x2 kawasaki motor clickingtapping noise
Utility Vehicles UTV/ATV
Replies 3 Post by fishy1

Well, after a shower and supper I decided to start disassembling and removing the linkage completely, more than I did yesterday. I found a roller bearing that was inside two butterfly shaped plates on the right side of the transmission. Cleaned up the bearing then reassembled all the linkage parts and now the hydro pedal returns to center perfectly. I hope this fix lasts. At least I know how the linkage works and what it is comprised of.

BX2230 Hydro pedal won t return to center position
Kubota Tractors
Replies 3 Post by WhitleyStu

I'm surprised it's a foton. I've got a 2006 40hp foton and I'm happy with it. One of the regular problems is losing electrical contact in the various plug ins. I keep a can of electrical cleaner and have to spray them every now and then, and the mostly the main dash and alternator to battery. I bought a backhoe attachment and I'm digging out the backside of a pond (60x40x8'deep area) right now. Went over to the neighbors and pulled two trees the other day. I brush hog, finish mow, plow snow, till, and grade and it does everything I need it to do. I'm happy to hear there's service available for them if needed - so far I haven't needed any.

NorTrac 35XL Northern Tools Foton I think
Other Tractor Brands
Replies 17 Post by yocsr1

Thanks Monty, I'll give it a shot.

Y485 Injection Timing
Jinma Farmpro Agracat Nortrac
Replies 8 Post by stevek924

I can supply the closest manuals. parts at sheaftractor.net

Mitsubishi 3201 Tractor owners manual
Mitsubishi
Replies 2 Post by lsheaffer