Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

The 7th Guangzhou Int'l Garden Machinery Fair (GMF 2015)<br>
Date: May 9 th-11 th,2015 Venue: China Import and Export Fair Complex (Area B)<br>
<br>
About GMF<br>
In GMF 2014, about 100 established companies were gathered to exhibit and showcase their latest products at the show, such as Stihl, Husqvarna AB, Greenman, Bronte, O-JENAS, Global Tools, Jiling Dongyuan Machinery Manufacture Co., Ltd., Ma��anshan Green Friend Machine Manufacturing Co., Ltd., Lu shyong Machinery (Zhejiang) Co., Ltd., and so forth. They were all appreciated the fair and would like to book larger space in next edition.<br>
<br>
In GMF 2015, the Organizing Committee also will do our best to invites professionals worldwide to build a platform for communication, cooperation, brand publicity and product promotion.<br>
<br>
China Market, you cannot ignore! <br>
From 2004 to 2012, China's landscape investment amounts has been increasing from RMB35,950 million to RMB238,004 million. At the same time, the green area has been increasing from 1,321,900.00 hectares in 2004 to 2,367,800 hectares in 2012. China market is gestating large business opportunities. <br>
<br>
What��s more, China is also the largest garden machinery manufacturing base in the world. That��s why many Europe and America brands are attracted to China market and build factory to China, like B&S, Honda, Khloe, Stihl, YAMAHA . Will you afford to miss the best chance?<br>
<br>
Want to expand overseas market? Want to make new network? Want to promote brand image? <br>
The Largest Garden Machinery Show Guangzhou Int'l Garden Machinery Fair(GMF) is the best platform for you to make your business dreams come true.<br>
<br>
Exhibition Scope <br>
Planting, Municipal Machinery: rotocultivator, cultivator, tiller, ploughing machine, ground auger, etc.<br>
Pruning, Spraying Equipment: lawn mower, motor, water pump, sprayer, brush cutter, hedge trimmer, chain saw, mist duster, water pump, power saw, high-branch saw, blower, cultivator, earth auger, keypunch, high-pressure pump.<br>
Irrigation Equipment: sprinkle-nozzle, solenoid valve, controller, agricultural microjet, lawn-use watering equipment, home-use equipment, agriculture-use watering equipment, junction, leather hose.<br>
Gardening Hand Tools: craft scissor, pruning shear, hedge shear, hand saw, water pipe.<br>
Greenhouses & plastic shelter equipment: planted tank, water supply system, temperature control system, air ejector fan, heater fan, temperature sensor, temperature-system control box.<br>
Horticulture and garden application products: flowerpots, containers, thin film, peat soil, etc.<br>
<br>

Garden Machinery Fair May 2015
Everything and Anything
Replies 2 Post by grand2

after reading good advice,started at battery.2007 replaced it. cable ends where cone shaped inside, replaced cable ends(battery clamps) lights come on,but keeps blowing ignition fuse .start cleaning ignition terminals,fuse box terminals,remove and clean fuses, unbelievable amounts of dirt and grime mixed with loads of grass. now when turning key I get a click but it does not blow the fuse,ithen clean the connection on the seat switch(the seat switch does not stop the tractor from starting,it only shuts the tractor down when pressure is reliesed while pto is engadged)now I turn the key and no click the starter trys to engadge and the lights dim, so I blast the new battery with 200 starting amps and it fires up thank you so much for the expert advice saved me at least $400.00 just for the dealer to come get it and look at it im starting to like this internet thing

John Deere 4310 electrical short
John Deere Tractors
Replies 5 Post by jdurb1

I use mothballs around my tractor and in the sheds. Haven't had a mouse since I started using them - ten years now. I had trouble at a state park with raccoons getting in my bass boat (fish smell in the livewells) and got mothballs and put around the boat and they stayed away. I even put them around the perimeter of my house just before they take the farm fields out and have never had a mouse in the house.

How to stop Mice Rodents eating Tractor Wiring
Parts and Repair
Replies 25 Post by yocsr1

ricksuddes has posted a new photo.

Subject: Stop Chewing Rodents.

Description: <br>Over 5000 people are spraying Rataway Fragrance and have saved over 8 million in
damage.Rataway Fragrance is $ 25.00 and makes a gallon, enough to spray an engine 50 times.Waterproof Rataway is two products and makes a gallon $ 33.00
Go to www.Rataway.com or call 805 646 2177 sold worldwide!

Stop Chewing Rodents - New Pix by ricksuddes
Photos
Replies 1 Post by ricksuddes

oh,that is good!

Your email?

How about your business about spare parts? Any purchase plan?

Kevin
wyk991604 at sitongjx.cn
www.badajx.en.alibaba.com

Is there spare parts dealer for Jinma tractors
Jinma Farmpro Agracat Nortrac
Replies 5 Post by wyk991604

Hi from accross the pond, I have picked up a Gator TS with the single cylinder kawasaki engine that i rekon has a broken con rod. I am trying to split the engine but cannot get the variable drive off the crank. Can someone tell me what tool i need for this or is there a way to do it without the special tool, Can i make one?

TS Kawasaki engine strip
Utility Vehicles UTV/ATV
Replies 1 Post by lostjohn

Hey guys

I appreciate any feed back. I do make mistakes. I like to point out that I stream-line my work, which makes it easier for me to do the next time I need to do work on it.

You would have noticed that I had I already pointed out that procedure which you have suggested.

If you look under my name "HUDDLESTON", which is located on the page. Just take your cursor and place it there and click on it you will see a list of all my messages and pictures concerning the repair of the hydraulic lift.

When oil enters into a cylinder the pressure is place equally throughout the cylinder. The pressure will move the piston either in or out. When the pressure builds up to the point where it will not lift or lower the implement you will hear a noise. It will be a high pitch noise where the relief valve has open. This is a safety valve where the pressure has exceeded its potential limit where it could cause damage to the components of the system including the hydraulic hoses.

The engine speed works in correlation to the operation of the pump and the implement that is moving. The flow control valve operates the speed of movement of the implement and so does the engine speed. The faster the engine speed the faster the pump will run. Some system have a few more components in it which you need to know, if you want to know how it works

Concerning the hydraulic lift operation, which moves the piston back and forth, we have found overtime that the rubber seal and scraper combined with the rust buildup will cause some wear on the cylinder. To get it back into working operation you will need either a larger rubber seal or you will need to use a brake hone to remove any scratches or grooves from the cylinder.

If you have worked on many cars it's the same as the inside of a brake cylinder which had water buildup over the years. You will find that water within the system will cause the metal to rust, this rust will build up over time. The piston will cause excessive wear which needs to be honed or replaced.

Rust seems to collect in places where there is less oil flow or behind the rubber seals located on the pistons. This rust will lodge itself at the bottom of the rubber seal, which will move back and forth inside the bottom of the cylinder, it will continue to collect enough rust until there is enough buildup to start cutting into the metal. Usually this will happen because people don't take the time to do preventive maintenance. Oil needs to be change as well as filters. Usually a pump will fail first, however is some circumstances it will be a cylinder.

This excessive wear, will cause scratches and grooves, which will only be found in the cylinder wall where the rubber and scraper touches the bottom of the metal cylinder. If you check my messages and pictures, it will describe how the water gets into the system.

The only reason for removing the reservoir block was to repair any damage to the lift cylinder itself. You would need to remove the reservoir block from the tractor. The cylinder is bolted to the bottom of the reservoir block by bolts that come up from underneath and screw into the cylinder.

If the piston seal is compromised it will leak. A bad cylinder will not allow the piston seal to work correctly. Your cylinder may need to be machined to remove any damages.

If you have the correct oil pressure and it still will not lift, you may also have a component issues, such as a relief valve may be stuck open. If your not sure you will need to find someone who knows how to check or work on hydraulic systems. There are some components which need to be tested to see if the system is working correctly. Working with a hydraulic system can be very dangerous. You will need to purchase a "fluke" hydraulic oil pressure gauge in which to check to see if it meets the specs.

If your not sure about what your doing I can assure you that there is nothing more dangerous than a cavitating hydraulic oil pump or a weak hydraulic line. A cavitating hydraulic oil pump can explode like a grenade. A weak hydraulic hose can fail and high pressure oil can slice through flesh like a knife or worst pierce your body cavity. You will need to make sure you have enough oil in the system, the pump can't run without oil, it will pit the plates and cause excessive heat buildup which may damage the pump. Clean oil, plus a full tank of oil is mandatory, it will extend the life of the pump and the systems components.

Oh yes, someone sent me an email concerning a cylinder on a front loader. This cylinder works in the same compacity, however I need to point out that the outside elements may affect its operation overtime. When the piston pushes the rod out of the cylinder it is affected by the water, dirt and anything that might strike the clean slick shaft that fits inside of the cylinder.

Inside of the cylinder is a scraper seal that does its best to keep out the elements. Yet, overtime you will see that the cap end of the cylinder will start leaking oil. Before you remove the cylinder, which you may believe that it needs a new seal.

If the cylinder is working in the manner which it does its job. I would recommend that that you take the end cap off. You may have to buy a good spanner wrench. Mine cost over $100 dollars at Grainger supply.

You will notice that there are holes on the face of the cap of the cylinder and there are holes on the outside circumference of the cap. After removing the cap you'll need to buy a good silicone sealer and fill up the cavity at the end of cap and the seal will usually fix a leak.

Make sure that you fill the cavity behind the scraper seal. When tightening this cap down you will probably have some of the silicone come out of the cap threads and this is okay. Read the tube to see how long it takes to set up and double the time since it is inside of the cylinder. I have yet had a cylinder leak after doing this.

Another email:

Concerning about welding a hydraulic cylinder. When cylinders get old, paint falls off and you will have rust buildup at the weld seam. Overtime these seams may compromise and start leaking oil and may even split.
I'm always informing people that these are expensive parts and a little sandpaper and paint will help keep these in working order.

These aren't large splits, maybe less than 3 inches however when oil is pressurized it will spray quite a bit of oil.

It's always best XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX take your time.

One end is the cap and the other is the pin connection. You will notice the two hydraulic lines that connect to it. One hose is attached at each end. Usually at the pinned end is where the cylinder will bottom out, this is where the seals are located at the end of the shaft at the bottom of the cylinder.

When oil is delivered at the pinned in it will push the shaft out to the cap end.

When oil is delivered the the cap end it will push the seal to the pinned end.

The point I want to make is that you need to know where the seal is located inside the cylinder before you weld. Move the seal to the end furthest away from the split. Grind down the outside of the cylinder.

I want to point out that I usually do this out in field.

To tear down a piece of equipment that needs to be working is costing time and money. If I can do this without any consequences (damaging any more equipment) or violating my safety I will try it.

Everything is relative to what you believe that you can accomplish. If you have second thought this isn't for you.

This can be dangerous.

I highly recommend if you do it, you will do it in a controlled situation first. I learned this while I was in the US Navy, only by someone that knew what they were doing.

I don't take anything for granted when dealing with electricity, pressurized oil or mechanical machinery.

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

If the cylinder is small in length you may want to wrap water soak rags around the cylinder to protect the seals. However you are working with high voltage electricity and it doesn't mix with water.

BACK TO THE TRACTORS HYDRAULIC LIFT.

That is why I suggested to anyone who owns a Nortrac tractor. To remove the oil from the reservoir a person needs to drill a hole in the base of the reservoir even with the bottom in which to remove water buildup. You could drill and tap a 1/4 hole and place a 4 inch pipe with a cock valve on it.

It would have been nice if the manufacturer did it.

I was asked by someone where I learned my knowledge and experience. When I graduated from high school I went to a Diesel School in Louisville, Kentucky. I got drafted in 1970 and the next day I joined the US NAVY. I went to their diesel schools to work on the big boys ( Fairbanks and Morse ), these engines were over twenty feet long and twelve feet tall. I was station on the USS Independence CVA 62.

With these big engines we hardly ever change the oil we always replenished it. The oil was always tested to see how much acidity buildup acquired over each month. Then we removed or added oil / additives to specifications that required proper operation of equipment.

Today, I still do this with most of my mechanical equipment.

I have never had a automatic transmission go bad. I always removed what was in the sump and replaced it every-time, whenever I did an oil change.

Engine oil is cheap, however it is best to change it instead of adding additives. You will notice the car manufactures keep pushing back their oil changes. The last one I notice was 6000 miles. I can only say that they want you to keep buying their cars instead of repairing them.

I change my cars engine oil and filters every 3000 miles, all the other fluids I change every 3 years. I replace all belts and hoses every 6 years. I grease all joints once a year.

My tractor I change the oil and filters once a year.
I grease every fitting every time I use it, especially the back hole and front loader. These pins need to be greased each time that you use it, they wear out quickly
in they are not greased.

Anyone can do this work, however you need to learn not only the basic mechanical knowledge, you need to learn safety protocol in dealing with these types of problems.

You always hear that when someone dies from an accident more than likely it was someones hobby. Lot of times people take things for granted if they see someone else doing it. They thought they could do this type of work too. Please take the time to learn about anything that is dangerous before you work on it.

I also went to plumbing, electrical and HVAC schools, I needed to learn this while working for General Electric Company

There are so many videos on you tube that may help. Just type google and it will take you to sites in which you may find books or DVDs to help you.

I hope this clears up any issues.

Again thanks for the reply.

Huddleston

Nortrac Hydraulic Reservoir Repair
Jinma Farmpro Agracat Nortrac
Replies 8 Post by Huddleston

Thanks a lot!

Kioti 1914 Tractor Wiring Harness and Dash
Kioti Tractors
Replies 3 Post by bmulker1

"Turning the Key on nothing happens, even dash lights will not light some times do"
"Battery is new", I am assuming you cleaned the posts and cables when you replaced it.
"You have 12 Volts at the ignition", I am sorry here, I don't know what you mean, I thought the 7235 was a diesel and when I think of ignition, I think points coil etc.
"Turning the key on the voltage drops" - You don't say how much, but with only dash lights I would not expect it to go below 12.5 to 12 at the very worst as the lights should only be drawing less than an Amp. Glow plug drop would be a lot more of course maybe as much as 15 amps each and that would taper off over time.
"Fuses are good, Starter works"
The starter solenoid latch up voltage should be good to about 10 volts, 12 giving it the best contact, as the voltage drops there may not be enough energy to even engage the teeth on the fly wheel.

For all you've said, I would be looking at the wiring off the switch to be shorted someplace prior to the fuses but after the switch. About all you can do is trace it out, move the wiring bundle away from the chassis or any panels it passes through or try changing position so it has a new area of contact on the jacket or bundle.

cub 7235 won t start Wont Turn Over Glow Plugs have no power
Cub Cadet
Replies 4 Post by taogden

Sounds like a bad ground. Check ground to frame connection & battery clamps to battery.

cub 7235 won t start Wont Turn Over Glow Plugs have no power
Other Tractor Brands
Replies 2 Post by lsheaffer

Here is the diagram

Cub Cadet 7274 Tractor starting problem
Cub Cadet
Replies 12 Post by Larry Lutz

Try this company,
I had a engine to freeze and break and they got me a good used one ,price was good also good service, They also have small John Deere tractor parts

Hoye tractor Parts
1-940-592-0181

Yanmar Tractor Diesel 3T72 Parts
Yanmar Tractors
Replies 7 Post by 46bugs

Snydet,

Check to be sure your loader valve isn't stuck in the float position. To me, it sounds as though the hydraulic system is in use somewhere else....more than likely the loader.

Work all of the valves on your loader joystick to be sure that they're all centered.

Hope this helps.

Joel

jx75 Case IH 3-point hitch will not raise
Case
Replies 3 Post by candoarms

I don't know what the Chinese recommend for hydraulic oil.Some of the Japanese recommended 80w-90 gear oil. Put a tee in one of your bucket hoses & install a pressure gauge. Read the gauge when the cylinder comes to the end of the stroke. Check this against the factory specs.

Farmpro Jimna 2003 2425 tractor hydraulics
Other Tractor Brands
Replies 2 Post by lsheaffer

It sounds like you need to tighten the friction device on the lever. Item #5 is the nut to tighten it up. Just snug it up until it is tight enough to hold the position you want.

4400 HST 3 point hitch problem
John Deere Tractors
Replies 9 Post by jdgreen

The internal pressure valve on the Kubota tractor is set at 2250 psi. In operating conditions with full load it can vary from 2200 to 2300 psi

Kubota B7000 Hydraulic system pressure Level PSI
Kubota Tractors
Replies 2 Post by jrmjc7517

Bosco,

This old conveyor was originally powered by an electric motor/gearbox combination unit. I was often irritated by the fact that I had to use it somewhere within reach of an electrical outlet.

The conveyor was lengthened by four additional feet, then converted to be powered by a hydraulic motor. The hydraulic power comes from the log splitter.

I purchased a new valve for the splitter. The new valve has a power beyond port. When the splitter is busy splitting wood, the conveyor doesn't run. The conveyor runs only after the splitter finishes the splitting cycle.

No longer does my splitter eat up gas while waiting for another log. It's now busy doing something useful at all times.

I can now place my conveyor anywhere I want to. The power comes from the splitter, allowing me to take the whole operation out into the trees with me.

Joel

Firewood Conveyor - New Pix by candoarms
Photos
Replies 4 Post by candoarms

Recent years, Chinese tractors like Jinma Dongfeng Foton are exported a lot because of lower price and good quality. As we work with many tractor owners from over the world. Feedback about tractor quality is mostly good.
The biggest problem is from the local dealer. They can not supply enough after sale service for their customers, for example, spare parts. So many our customers complain that it is difficult to get spare parts when their tractors break down. So consider your local market,service is good or not?

Kevin

Jinma Tractors Are They Worth It
Jinma Farmpro Agracat Nortrac
Replies 37 Post by wyk991604

There is always a brand mark on tractor and engine. You found brand mark on the engine. So there should be one more on the tractor. There are many tractor brands in China. So it is not an easy thing.

What Make Chinese tractor 40HP SL3105B engine
Jinma Farmpro Agracat Nortrac
Replies 12 Post by wyk991604

Thanks for your reply! Actually we get as much wet snow as powder. We have a foot on the ground right now and it is heavy. Still snowing and what is coming down is pretty dry.
A Merry and Blessed (white) Christmas to all.
Thank you for your suggestions.

Your Recommendation for a snow outfit
John Deere Tractors
Replies 6 Post by MontanaBilly