Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I don't know that line, and can't picture a three-way control, but if you're basically saying that the rear hitch slowly bleeds down when carrying a heavy raised implement...

... you might look for a rear-hitch check valve. It's likely a knob that you turn all the way in (clockwise) to lock the hitch from lowering. It goes without saying that the fluid should be clean and the right kind and amount.

SU1341 hydralics will not stay in raised position wonder whats wrong
Shibaura
Replies 5 Post by auerbach

On my 03 its a vent!,mine is white with a red cap, by extending it with a small piece of hose the problem disappeared!,I used a 6" piece of hose,if thats where the leak is coming from , it will fix it.

BX2200 Leaking Fluid from Rear
Kubota Tractors
Replies 17 Post by unit5alive

When the ignition goes to start it pulls the solenoid and makes the contacts that provide 12v to the starter motor, that is what you are doing. The other end of the solenoid is connected to a fork that engages the starter drive into the flywheel. Either the fork or the starter drive is bad. Starter drives go bad more than forks. Deere calls the starter drive a clutch. Deere has the parts if you feel like taking it apart, i'm sure new starters are 500.00+

Starter fails to engage
Utility Vehicles UTV/ATV
Replies 3 Post by gatoraider

Secondary clutches will loosen up on their hubs and rattle. The rivets get loose. The clutches come right off, no puller needed. If a 13mm wrench fits the bolt holding it on, it is a backwards thread. Anything bigger is a normal thread.

4x2 has a noise at the rear clutch
Utility Vehicles UTV/ATV
Replies 2 Post by gatoraider

PTO lever/switch get bumped? HST peddeal get bumped? Loose wire connect under tractor?

JD 4600 HST won t start
John Deere Tractors
Replies 2 Post by harvey

Hello all,<br>
<br>
I have a 89 JD 770 that currently acts as though it is a single stage clutch. I wanted to know if i could adjust the linkage arms to make it a 2 stage clutch? I see there is one adjustment hole for the pto linkage arm to the the clutch pedal arm. Will a changing to the lower pin hole change it to a two stage clutch?<br>
<br>
Thanks <br>
JD

89 JD 770 2 stage Clutch
Garden Tractors
Replies 4 Post by jdunn5

Kubota sent seats out for these couple years ago at a very good price but more than likely there is none of those seats left at that price, might want to check with you local dealer. Is the tractor maybe still under warrenty, if so look at the seat were the back starts it's bend up, is the cover look like it's pulled away from the foam, if so, it should be replaced free. Just done one on a b3030 end of last year, and the service rep seen it and said to replace it. Don't realy know how much a new one is from Kubota, but the one you get to replace the old one isn't shaped like the old one and sits much better.

Replacement seat for B7800
Kubota Tractors
Replies 3 Post by Gearhead

You will have to aleast buy a standard one spool valve, plump the power beyond hose through it.

3to4way valve for kubota tractor
Kubota Tractors
Replies 3 Post by Gearhead

I really need a manual for a MT25 for my dad. Could you tell me how to get one

mitsubishi mt 25 Manual and review
Mitsubishi
Replies 6 Post by tomaut2006

Hi Greg, I wanted to first of all say thanks, I found and cleaned the screen. The hydralics will now lift the tiller. I have one more question in regards to this. The little lever you pull back to lift the tiller seems to have a top, middle, and bottom, nothing really happens except when you pull it all the way back and it lifts the tiller, then if you let go of the lever the tiller bleeds off and goes to the ground pretty slow, but does go down. Lastly when I put it to what I would think would be the lowering position, no change really takes place.

I'm wondering if theres a valve or something that also needs cleaning or if this is pretty natural for these little SU1341's. Would appreciate your's or anyones elses thoughts on this. Thanks

SU1341 hydralics don t work
Shibaura
Replies 5 Post by bearcreek

Realize if your tractor had remote hyd you would go that way so another possible low cost option is find a used pto driven hyd cutter or such with operating pump and valve assembly.

If I understand what you are asking how about a used hyd log splitter or quick disconnect fittings on a log splitter?

Hydraulics Question
Tractor Projects
Replies 6 Post by kthompson

Looking at the color, is that a New Holland?
It does look good. So does the trailer load of firewood.

Just wondering, how long is long distance shooting? What kind of caliber?

Here long range is 200 yards which I know you probably consider iron sight shooting possibly even handgun.

New 2 cylinder toy
Just For Fun Off Topic
Replies 4 Post by kthompson

This past Saturday as I was using my TWO wheel drive tractor and looking at my FOUR wheel drive parked under shelter a thought hit me on my comments...my brain likes simplier ideas. So I hauled and dumped another load of dirt and went back for another. Weather was great,so this is why have equipment, to play in the dirt...I mean work the dirt.

front rear ratio for kubota b7800
Kubota Tractors
Replies 23 Post by kthompson

[QUOTE=senseishogun;169924] e where y've download YANMAR SERVICE MANUAL,or OWNERS MANUALfor the 2210 D yanmar tractor? [/QUOTE]I don't believe you'll find anywhere that offers manuals on a download basis. Well, not a [i]free[/i] download anyway. More likely you'll have to purchase your Yanmar manuals in either paper or optical disc format. Click the link below for an example.<br>
<br>
//greg//

hydraulic oil type for yanmar 2210D
Yanmar Tractors
Replies 7 Post by greg_g

Helicoil?

broken bolts
New Holland Tractors
Replies 5 Post by kwschumm

After buying my first John Deere (1983 JD 310B backhoe) I am learning JD kind of keeps in all in the family when it comes to manuals, parts, etc.<br>
<br>
Is there next to nothing after market for older John Deere equipment? Do some some dealers offer online parts or do you have to deal with a local dealer?<br>
<br>
I registered on the JD site and they permitted me to select one dealer.<br>
<br>
I kind of got spoiled getting most of my stuff online for the 1976 265 Massey Ferguson. Getting into a dealership is a pain for me. <br>
<br>
Thanks<br>
<br>

Online vendors of John Deere parts
John Deere Tractors
Replies 3 Post by GaleHawkins

I am not sure this search cleared up much for me but it was funny in the end. :)

Dielectric antioxidant grease
Shop Tools
Replies 10 Post by GaleHawkins

The DK 40 se are very nice tractors with a lot of nice standard features.<br>
Push button 4 wheel drive, hydraulic rear remotes, independant PTO, draft control, extendable lower link arms on the 3 point hitch, a lever to control the 3 point from the back of the tractor to make hooking up implements easier, the Kioti loaders on the DK models come standard with a skid steer style quick attach bucket. Etc.<br>
Good dealer service or not depends on your local dealer just like any other brand.<br>
I have a 2001 Kioti DK 35 with 1400 hours.Excellant tractor. Very reliable,no problems at all. <br>
I own both John Deere and a Kioti tractor. Parts for my Kioti are as easy to get as they are for my JD. I call the dealer, order the parts and they are mailed to my door. No differance.

Kioti DK40Se Tractor
Kioti Tractors
Replies 8 Post by DK35vince

senseishogun has posted a new photo.

Subject: this is my YANMAR !.

Description: <br>YANMAR 2210 D,550 hours , year of fabrication = i dont know!

this is my YANMAR - New Pix by senseishogun
Photos
Replies 1 Post by senseishogun

pugwash4 has posted a new photo.

Subject: gator.

Description: <br>.

gator - New Pix by pugwash4
Photos
Replies 1 Post by pugwash4