Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Ken... the 41xx's don't have no stinking code flashers.

Less is more. That is why we only get a "something is wrong" with a 41xx every five years or so......

Good advise though..... I would check the seat switch first and any other positional switch that controls the start function, like the H-N-L lever and double check that PTO switch along with any loose wire connectors.

4110 Stalled and won t restart
John Deere Tractors
Replies 7 Post by DRankin

Bill; I was concerned about using gear oil for hydraulics but apparently it is ok. Thanks again!

S-373-D Oil
Mitsubishi
Replies 3 Post by rdmdmr

To Jerri Nees with the flying loader--sorry I don't have an answer, except check your hydralic fluid level--My question is does your E2304 have power steering? Mine doesn't and I NEED to change that. Any help? Ron Hoffman

Hinomoto E2304 with Koyker 150 Loader
Hinomoto
Replies 2 Post by ron234

Lubehead,

That's more than just a bit high.

Tractorhouse.com has listings for 5 different TZ25D's, and all are priced much lower than the price you listed.

Joel

TZ25DA
New Holland Tractors
Replies 2 Post by candoarms

Thanks Mark for the suggestion. I have always used gas engines in tractors as a kid and Dad always said don't over rev the engine....

I need to remember to do this, especially when working it hard as you suggest...thanks.

As to the original question on this thread, I realized later that "Tonyia" may not necessarily be concerned about the actual horsepower that I addressed, but about the displacement implying I'm sure as to durability. Does anyone out there have thoughts on this? Does Kubota have smaller engine displacement than other brands with similar horsepower? If so, do they run "hotter" and is that an issue?

Brian

Kubota engine
Kubota Tractors
Replies 9 Post by bvance

Glad to hear you like it. For such a small chainsaw it is a real haus and gets a lot of work done on a tank of gas. Did you get the 14 inch bar? Very welcome. I should have mentioned that you should get the stihl sharpening kit pouch that comes with the file hold file and handle. The smaller chain is real easy to sharpen and so far lasts about 5 tanks of gas between sharpenings.

Stihl chain saws
Just For Fun Off Topic
Replies 21 Post by Chief

I need an English version manual that will work for an Hinomoto E222?
Thanks in advance,
Bluestar

hinomoto e222
Hinomoto
Replies 13 Post by bluestar

3 1/2 hrs. on the tractor. My feeling is that the tractor should have been considered a left over and further discounted. When I called the JD main number for the serial number lookup, they called the tractor an 05. I think to call something new that was made 18 -19 months ago is a stretch. Thanks for the reply.

new 3320
John Deere Tractors
Replies 4 Post by fishman

We have a smooth top (white) GE electric. I do most all of the cooking and I like it fine especially when it comes to clean up. So far no scratches or problems after 4 years.

I have heard a lot of people say they like gas better for cooking but we have never had gas available so have always had electric.

Gas vs Electric range for cooking
Home Improvement
Replies 15 Post by dkheckmanl

I know of two, Zimmer Tractor and Twiw Vally. Zimmer Tractor is in monroe right off 75 and twin vally is on 35 just east of eaton i think.

Southwest Ohio Kubota Dealers
Kubota Tractors
Replies 4 Post by Gearhead

From the subject line thought you were talking about my wife's relatives :)

Every spring we suffer an onslaught of black carpenter ants. A two pronged approach works on those for us. I spray around the inside perimter of the basement with diazinon and sprinkle Amdro ant block around the outside perimeter of the house. 4-5 days later and the ant invasion stops for the season. I'm not sure if Amdro works on the little read ants though. This is our second year using it and we've been very pleased.

Help Howto Control Red Ants
Garden and Landscape
Replies 2 Post by kwschumm

Some people call my old books junk, I call them reference material! Checking the codes and the sizes from the newer series I believe Alr8869A and Alr8855 rears should get you a set of industrial tires and rims that will bolt on to your tractor. The retail is $1840.00 for all four. I'd recommend that if they have a set you borrow them to be sure as the letter codes are a little different. The mid mount mower will not fit with the industrial tires on the new tractors so I'd doubt they will fit on the older model. Good luck!

R4 tire availability
Parts and Repair
Replies 7 Post by Art White

But lbrown, do you use your tractor to mow?

How Can You Put 550 Hours on Your Tractor on 2 Acres
Just For Fun Off Topic
Replies 4 Post by crunch

When you back up do you turn around to watch where you're going? I did on my 4310 and I found that by shifting my weight on the seat I was causing the seat safety switch to stop me from going back. Once I realized what was happening (and it took a long time) I focused on keeping my weight centered on the seat while in reverse and the problems stopped.

John Deere 4210 Reverse Pedal not Working
John Deere Tractors
Replies 10 Post by crunch

Thats where I might help but otherwise it is great to just be able to watch!!!!

Filling tractor tires
Parts and Repair
Replies 22 Post by Art White

Things have been pretty hecktic around here also. Since I am the only person in the house still working, I seem to have fell in love with over time. Got 2 days off over Mem. holiday (which I spent half the time at the hospital, and had two days off to pick up the kid at college. Other than taht worked every day since Easter week. Get home today and find pollen over every thing you can see. This is the Yellow crap that stains everything it touches! I spent the few hours of daylight before the storms came in to put some soap to the old ford tractor and the chevy's in the drive.
Sunday (yes the day I had off) I spent towing one of my vans home on the car trailer. My son had a brake line blow on him on the highway that morning. A single pot too. He managed to catch it before traffic jammed up and in on him. He got her off to the side and out of the way with no damage to our or any other vehical. Hmmm, I spent Sunday splicing into a brake line (only part that was rusted was right behind the front wheel????) the rest was like new?
Oh, then I got to head back to the local hospital again! Feeling like I need to move soon! Way to much/many bad vibes around here!

WHAT DID YOU DO TODAY
Just For Fun Off Topic
Replies 57 Post by brokenarrow

Murf, maybe the 3ph on orange tractors is further back than it is on green tractors but I have no trouble releasing the quick hitch handles from the seat.

3PH attachment easy or tough
Operating and Attachments
Replies 33 Post by kwschumm

"Amen to preacher EW!"

Same can be said about money. Women and vehicles are almost guaranteed money losers. No doubt about it.

But... the alternatives aren't so good.

Trials and Tribulations but goes faster now
Pickup Trucks and Trailers
Replies 9 Post by Iowafun

I'll help, but I don't loan out the expensive stuff. Just too much money tied up into it and people just don't respect the property of others anymore. Not to mention the liability if something goes wrong. First thing people do is hire a lawyer and go after the good guy who helped someone out.

Do you lend your tractor
Parts and Repair
Replies 33 Post by Iowafun

Same thought has crossed my mind but I can't bring myself to give up this land.

Disk Mower vs Flail Mower vs Sickle Bar Mower
Mowers Field and Finish
Replies 13 Post by cutter