Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Looking for a wiring diagram for a MT372. Alternator output and relay are good, but will not charge battery.

MT372 Wiring diagram
Mitsubishi
Replies 5 Post by bmsbob

Big brush hogs and big bales, more than almost anything else, dictate the size of the tractor.

You can buy a hydraulic bale hauling trailer that will give you some fudge factor but there is nothing you can do with a big brush hog except buy a big tractor that fits it.

What is Best
John Deere Tractors
Replies 15 Post by DRankin

Does any dealer have a lift shaft for a 3 year old 354? It has 8 splines.

Lift shaft for 354
Jinma Farmpro Agracat Nortrac
Replies 5 Post by mscott6799

I believe there is something about this particular thread...

Oh well, does anybody want the spambots contact info ??

Re Snow Plow for tractor or truck or snow blower
Snowblowers / Snow Plows
Replies 25 Post by Murf

I have a 99 with 500hrs, finishing mower and 4 ft bush hog that I paid $5500 for last year. The cab, loader and low hours will demand a higher price.

kubota b1700
Kubota Tractors
Replies 2 Post by Dan

There was no problem with the mid PTO at all. The MMM's driveline was disconnected; the mid PTO worked just great. The problem was in the MMM. And the MMM's problem has been fixed too.<br>
<br>
Ah! The mechanical version of Ex-lax: hammer, a broad chisel, and about a half hour of time was all that was needed to remove a great conconction of mud and dried grass. It was so bad that 2 of the 3 blades were only able to move about an inch or so.<br>
<br>
Coming home tonight, I remembered putting the deck on about 2-3 weeks ago for the afternoon just so that I could mow the front. It was a mess that day with wet tall grass and weeds, some muddy spots, and then it started raining on me when about 2/3 of the way done. I pulled the MMM off the next day since doing more excavation work with the box scraper.<br>
<br>
Anyway, this "problem" was a self-induced one. The blend of weeds, grass, mud, and rain must have been just right for such a buildup. I never realized the amount of mud/grass that could and did collect inside the MMM. The stuff was well-dried from having been in the garage for several weeks. I can understand how mud bricks can be so good now; that was some tough stuff. I never thought to check underneath the MMM prior to putting the it back on yesterday afternoon.

DX24E mid-PTO Problem
Case
Replies 3 Post by wr5evk8jj

The automotive crunch is hitting southern Michigan the hardest. I live in Central Michigan, Middle of the Mitt, near Mt. Pleasant and we have never had the kind of economy that southern Michigan has. So when you don't have it, you can't lose it!

Central Michigan is doing real well right now, very large casino, new stores and manufacturing coming in. Lot less hassle with zoning than the larger cities. Also two large universities and several community colleges close by. Some of the new technology's coming in are fuel research and ethanol production and high tech information.

Another advantage is not many unions at all left around here, almost all union shops and plants have closed. Lots of Michigan manufacturing went to the south in the 80's and 90's due to unions and the winter heating expense.

Michigan has two natural problems, it is a peninsula and it is too @#!%$#@! cold in the winter. The peninsula is why all the heavy manufacturing is in the south, just too expensive to ship raw materials in and finish goods out. Not even many railroads at all north of Lansing any more.

The cold winters are not my favorite at all, but they do keep Michigan from overcrowding and still land prices are low compared to the coasts. Minnesota and the Dakota's are colder as the great lakes do help, but four months of less than 32 degrees is still too long.

I think Michigan will do just fine. When the economy was bad in the 80's enough people went to the south that there was more opportunities for those that stayed. Seems to be happening again.

ksmmoto

SW Michigan Relocation
Parts and Repair
Replies 56 Post by ksmmoto

I have the water pump on hand as well as the seals. Email or call 1-800-609-5110. Bill

mitsubishi parts
Mitsubishi
Replies 2 Post by BillRodgers

I'm looking for a grass catcher (bagger) for my cub cadet model 1527. Anyone know where I might find one.

Bagger grass catcher
Cub Cadet
Replies 1 Post by Jerry Roder

I am soooooo surprised!

Glad you got it sorted out.

Vibration noise in Tundra
Pickup Trucks and Trailers
Replies 5 Post by DRankin

I am looking to purchase this used B8200-dt with BF300-A Loader and 4520B Backhoe. The tractor also comes with a Ganon box blade, 72" "Warthog" scraper, 52" rototiller. The tractor only has 622 hours on it and has been sitting in storage for the last 7 1/2 years. The tractor is in decent condition with minor cosmetic blemishes. Owner just put a new starter and new battery in it. He is asking $9,950.00. Is this a fair price?

Price on a Kubota B8200-DT
Kubota Tractors
Replies 1 Post by Lterpy

Main thing is to not let the grass get out of control. When I do, that's when I have problems. Keep up with it and you will be fine. Course, with the cost of fuel these days, it's harder to keep up.

I don't think my wife would like the nature look to our lawn. Oh well. An excuse to run the tractor.

Rookie question use a grass catcher or not
Operating and Attachments
Replies 12 Post by Iowafun

We have a number of parts for John Deere 950 engine, what exactly do you need? How may we help you?

John Deere 950 Tractor
Yanmar Tractors
Replies 13 Post by US Ag Supply

I just bought a L295DT with front loader, the hydraulics were slow so I replaced the pump, the PWR steering, loader, and aux hydraulics work great now! But the 3 point won't raise at an idle, you have to rev it about 1/2 way to get it to raise, but won't pick any weight up, the higher you rev it the fast it will go up, but not carry weight. I have an old manual but the blow up of the 3pt internal cylinder is not there. I shimed the check valve, but it didn't help, I am wondering if there is an O-ring in the lift cylinder located in the case under the seat, if so do I have to take the whole top part of the case off? Is it a special O-ring? Any help or suggestions would be terrific!

Kubota L295DT 3 point not working
Kubota Tractors
Replies 4 Post by bmcbee

HF, I know just how bad it gets, I spent some time at Quantico, it's not any cooler there.

But I do agree, there will always be some maintenance, it's just a matter of trying to keep it to a minimum.

Best of luck.

What can I put along the foundation of A pole building to prevent wee
Garden and Landscape
Replies 32 Post by Murf

Hey guys, new to the forum.I have the Hinomoto 2004 and I need some back tires for it,9.5x22.Anyone have any advice? Thanks.

Rear tires e2004
Hinomoto
Replies 1 Post by wubbasnake

HOME DEPOT SCAM
Just For Fun Off Topic
Replies 5 Post by DenisS

Three. Wendell NC, MEXIA Texas and I don't know the western facilities location, only deal with these two. So far, warranty work on the Kiotis Ive sold (almost 3 years) is a couple hour meters on two CK20s in the first year. I don't think this 4 year warranty is going to cost them much, or have a huge impact on pricing long term.

4 year warranty
Kioti Tractors
Replies 18 Post by chipuren

That is to high. From the dealer here at that price it would also include a trailer.

2006 New Holland TC30 4WD 7308 Loader Review
New Holland Tractors
Replies 7 Post by RedNeck_Randy

fordman,

For reasons we do not know, the 2320 has been pushed back to July 2006.

Cheers

JDFANATIC

JD 2320
John Deere Tractors
Replies 6 Post by JDFANATIC