Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I went to the wed site for this Judge's Court, he chicken shit ass doesn't have an email listing.
I merely typed inhis name and position at Google.
If I were the City, I would leave it up and tell him to try and collect.
A friggin Memorial been there since 1954. Can you beleive this crap.
Seperate Church from State as faras I can read in the Consitution does not refer to this type of thing. I want to send this jerk an email, I will have to write a regular letter and mail it.

Are Crosses in City Cemeteries next
Everything and Anything
Replies 14 Post by wingwiper

There is NO WAY he is from W. Va. He has a few words in his posts that are spelled from the U.K. Australian or Canadian way of spelling and not the way we Americans spell anywhere here in the U.S.
Of course, not being from the U.S. he wouldn't know that.

Problem Poster
Everything and Anything
Replies 70 Post by wingwiper

LB call the people who deliver your home heating oil, if you use oil, or if not, the distributors who deliver to some of your neighbours.

Most distributors, have more than one compartment on the truck, and have several, with a different product in each one.

Often the same truck that delivers home heating oil also makes stops at construction sites and yards to delivered coloured diesel fuel.

If one such truck operates in your neighbourhood, the distributor will more than likely make a stop at your house also.

Best of luck.

Anybody having trouble getting off road diesel
Parts and Repair
Replies 6 Post by Murf

She misses the Mustang GT Convertible she had. But when the kid showed up, the car had to go since it wasn't all paid for yet and we couldn't afford to have that and a real vehicle for a baby.

That Mustang was a fun car. We'll get another one someday assuming gas isn't $10 a gallon.

Dual Exhaust Cat Back
Pickup Trucks and Trailers
Replies 24 Post by Iowafun

Just thought I would pass along an item which has made life so much easier for me this spring. We were converting about 10 total acres of brome grass into food plots and other habitat for pheasants. I purchased a 7 1/2 foot King Kutter box frame disc unit which weighs close to 900 lbs. We got the notched blades to help cut into the sod. What we found was that brome sod is much tougher than we thought. We could hardly penitrate the ground.<br>
<br>
I ordered a hydraulic top link from CMC Inc.. I got the unit that has cat 1 at the implement and cat 1&2 at the tractor end. My 4710 already had a pair of hyraulic outlets in the rear so hook up was a snap. <br>
<br>
I lowered the disc down into the sod and fully extended the hyrdaulic link and it dug into the ground like it was going into butter. I did have to use 4 wheel drive as the setup has the ability to lift the back wheels slightly off the ground (I have 400 lbs of wheel weights as well). I was sceptical about getting this at first but now I would not be without it. I can't wait to see how much easier back blading will be with this unit.<br>
<br>
Wish everything I bought to make things easier worked this well.

Hydraulic Top Link
John Deere Tractors
Replies 2 Post by reason201

Not sure what your intentions are for the grain drill but if there is a Pheasants Forever chapter near you, they often have then available for rent. Depending on what your intended use is, this might be an option.

Small Sukup Grain Drill
Operating and Attachments
Replies 5 Post by reason201

Sound like one gear missed hardening. They should have caught it in grinding. But I am sure a lot of this is done on an automated machines now.

Broken Gear in Transmission
Kubota Tractors
Replies 6 Post by Peters

Isn't it funny how you can make up a tractor payment by mowing a couple of 2 acre fields, but couldn't dream of getting the same kind of money cultivating 4 acres with whatever crop you can think of? In effect, you get paid more for keeping land from growing things than if you produced something.

mowing for hire
Mowers Field and Finish
Replies 24 Post by DenisS

I just purchased a tractor called a kubota B1-14-D. Under the hood it is written in felt pen B6200. I have seen pics of the 6200 and it looks like the same unit. I need a gear for the transmission and need to know where to get it. The tractor only has 132 hours on it.

kubota 6200dt
Kubota Tractors
Replies 7 Post by stump

Just a different thought on this. There are a lot of used commercial mowers out there that are available at good prices. They are often the least desireable on a dealers lot and often can be bought for fifty cents on the dollar for there worth. Where you can mow at the higher speeds it's your option and where you need to be cautious you can.

ZT or Lawn Tractor
Garden and Landscape
Replies 13 Post by Art White

You never know what you might find for a problem from one owner, to one model of tractor or make. We haven't seen any prevelent problems as you have descibed so it might be close to being a isolated problem depending on washing intervals and intensity. I have yet to find any repair that was needed to be enjoyable as it is like going to the doctors or dentists office for me and I always have`a different place for money in which I might find a small pleasure in life instead of possible pain. Just my feelings on that note but unless a company continually has equipment that needs updates shortly after the new releases would I worry. When the reason for the failure is found then the proper way to prevent a failure can be found.

4 WAY FLASHER PROBLEM - BX 23
Kubota Tractors
Replies 33 Post by Art White

Unlike the newer tractors were they are using a frame and compontents that are attached to the frame this is a built in system and it does require more information on the design to help you off the cuff so to speak. The older tractors used the castings as passages for the oil to componnents of the hydraulic system. It will take a good look at the service manual for the possible solution.

L285 hydraulics
Kubota Tractors
Replies 7 Post by Art White

The brackets Art spoke of are near the back and towards the inside of the rear fenders. Just disconnect the lifting rods and re-pin them to the bracket holes.

Bx1500 3 Point and lawn deck control
Kubota Tractors
Replies 12 Post by jarndt

I think by now you realize it will depend on your own case. I have mowed my lawn wiht a 6,000 lb tractor with water in rear tires and ag tires. Litle bit of mark made that in day or so gone.

I have used 2,000 lb with no water and ind tires and no marks on same yard.

I have used Z turn with turf on same with some sign left to no sign left.

For my use, the tires that cause the most problem are the front tires as you turn as they want to dig in. As to my experience, I did fine with all. That covers from wet heavy dirt to medium sandy loam.

One thing I found for myself regardless of the tire, if wet and soft, slow down. Speed damages.

Will B7510 with Ind Tires leave ruts
Kubota Tractors
Replies 13 Post by kthompson

The top link hole for a category 1 hitch is 3/4"(.750). If your sub-soiler has a smaller hole for category "O" [5/8"(.625)]you will use the smaller pin with a bushing having a 5/8"I.D. and 3/4"O.D. TSC and tractor dealerships will have this.<br>
<br>
Likewise if your tractor has a category 2 top link, it will have a 1" hole in it. If you have a sub-soiler with 3/4" hole (Category 1) you will put a 3/4" pin through it with category 2 to 1 reducer bushing. (1"O.D. x 3/4"I.D.)

Single Shank Subsoiler
Operating and Attachments
Replies 11 Post by yooperpete

You may find that a high volume leave blower like a Stihl may blow the stones off of the asphalt. <br>
<br>
I have smaller areas but use a Stihl yard boss which is a small tiller for $349.95 that has a PowerSweep attachment for an additional $179.95 which fits to it instead of the tiller blades. It is kinda like a drum with flaps. It only does about a 2 ft. section at a time. If your 10,000 sq. ft. is 20x500 you would have to take 250 passes for the 20ft. width. That is really time consuming!!!<br>
<br>
Every now and then at the shop we have a large staging area by the fab section. The asphalt is covered with weld scale, bits and chunks of steel, etc. We use a long length of hose from our air compressor with a long wand so the guy don't have to bend down. We call that the air sweep.

Sweeper
Operating and Attachments
Replies 7 Post by yooperpete

I went to Google.com and typed in used Yanmar FX17D parts and found 44 references, maybe one of them will have the part you need.
Good Luck

Transmission Failure
Yanmar Tractors
Replies 2 Post by wingwiper

Hello,
This lever in front shhould normally have 2 neutral positions, and 3 speed postions. These mixed with the slow and fast lever give you six output rpm ranging from a little bit lower than 500rpm up to a little more than 1100rpm. I will take note of exact speed and send you it next week.

Shibaura SD1800 PTO controls
Shibaura
Replies 3 Post by mahyar

Sump capacity is 9 liters. One drain plug, above and to the left of the PTO spline. Fill through the vent plug behind and to the left of the operator seat. Flushing technique depends upon whether or not you have a FEL

//greg//

How much Hydraulic Fluid
Jinma Farmpro Agracat Nortrac
Replies 2 Post by greg_g

Ranchhand - I thought of that but I'm not sure which one it is. I've always just used the eng/dis lever so maybe I'll have to fiddle around a bit and see if I can find it. My neighbot did borrow it a month ago to plow some snow so maybe he changed it.
Thanks

PTO
Jinma Farmpro Agracat Nortrac
Replies 12 Post by kalpia